The Engineers HVAC Podcast

Join us in this insightful discussion as we delve into Phoenix Controls' core decision almost 40 years ago—not to measure airflow in their systems. Discover the reasons behind this decision and explore the impact of airflow measurement accuracy on critical spaces such as hospitals and chemistry labs.

Learn about the limitations and challenges of traditional airflow measurement methods and the innovative approach of metering airflow instead. Gain valuable insights into the potential consequences of inaccurate airflow measurement in critical environments and understand the factors affecting the accuracy of pressure transducers and airflow control systems over time. In this thought-provoking video, dive deep into the world of HVAC controls and critical space management with Phoenix Controls.

Here are the key points covered in this podcast:

1. The Founder's Decision: Explore why the founder of Phoenix Controls opted not to measure airflow and instead focused on a different methodology for controlling airflow in buildings.

2. Impact on Critical Spaces: Understand the implications of airflow measurement accuracy in critical environments such as hospitals and chemistry labs, where even a small error can have significant consequences.

3. Limitations of Airflow Measurement: Learn about the challenges and limitations associated with traditional airflow measurement methods, including issues with sensor installation, response speed, stability, and maintenance.

4. Metering vs. Measuring: Discover the concept of metering airflow rather than measuring it, and why Phoenix Controls adopted this innovative approach to improve control accuracy.

5. Consequences of Inaccuracy: Delve into the potential repercussions of inaccurate airflow measurement in critical spaces, including operational disruptions, energy inefficiency, and financial losses.

6. Factors Affecting Accuracy: Explore the impact of factors like lack of straight duct runs, system delays, and maintenance on the accuracy of pressure transducers and airflow control systems over time.

The decision by Phoenix Controls not to measure airflow almost 40 years ago has paved the way for a new approach to HVAC control, focusing on metering airflow for improved accuracy and reliability in critical environments. By understanding the challenges and limitations of traditional airflow measurement methods, we can appreciate the importance of innovative solutions in optimizing airflow control systems.

Careful attention to design is crucial for laboratory settings, including fume hood face velocity, fume hood monitoring and use, laboratory air recirculation, laboratory/building pressurization, laboratory airflow exchange rates, manifold exhaust systems, exhaust stack height, exhaust duct velocity, general air distribution guidelines, controls (pressure-independent and general), testing and monitoring, work practices, selection of specialty hoods, and sound levels in rooms.

For critical environment Phoenix Controls valve support in North Carolina and South Carolina, please contact Insight Partners today!

For more HVAC content, you can visit our YouTube channel here: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

The Engineers HVAC Podcast: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products and Controls in NC, SC, GA): Website: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products and Controls in VA, TN, MD, AL): ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠www.hobbsassociates.com⁠

In this live episode, we will answer some of the most common questions concerning the R410A phase-down and replacement with A2L refrigerants R32 and R454B.

HVACR industry expert Don Gillis with Chemours is joining us.

For more HVAC content, you can visit our YouTube channel here: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

The Engineers HVAC Podcast: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products and Controls in NC, SC, GA): Website: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products and Controls in VA, TN, MD, AL): ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠www.hobbsassociates.com⁠

Email Tony Mormino: tmormino@insightusa.com

In this episode of the Engineers HVAC Podcast, host Tony Mormino of Insight Partners orchestrates a profound exploration into custom air handling units (CAHU's), shedding light on the intricacies and innovation behind these pivotal components in the HVAC industry.

The podcast features esteemed guests Joe Naccarello, Senior Vice President of Channel Sales and General Manager of DX at Nortek Air Solutions, and Mark Murray, President of Insight Partners, who bring their vast knowledge and experience to the fore.

This episode delves into what constitutes a custom air handling unit, offering clarity on the levels of customization available, and providing invaluable advice for mechanical engineers and contractors on achieving top-notch education in this domain. The discussion traverses the critical considerations for when to employ custom units and how to avoid the pitfalls of over-specification, ensuring optimal performance and cost-efficiency in HVAC projects.

Listeners are treated to an expert breakdown of the defining aspects of custom AHUs, including performance metrics, dimensions, material choices, and life expectancy. Joe Naccarello's insights illuminate the exceptional benefits of custom solutions, such as enhanced durability, tailored performance, and a lower total cost of ownership, highlighting Nortek Air Solutions' role as North America's leading manufacturer in this sector.

The conversation also emphasizes the irreplaceable value of factory visits for a comprehensive understanding of custom AHU manufacturing, a sentiment both guests echo. Such experiences educate and demystify the process and showcase each unit's meticulous craftsmanship and technology.

Further enriching the dialogue, the episode explores the transformative impact of advanced selection tools and software, like Nortek's NASDA platform, which streamlines the design process, enabling rapid iterations and precise customizations to meet evolving project requirements.

The discussions venture into the nuanced territory of motor technology, where Joe Naccarello unpacks the distinctions between induction motors, ECMs, and permanent magnet motors, providing a glimpse into the future of energy-efficient HVAC solutions.

For mechanical contractors and engineers, this podcast episode is a treasure trove of knowledge, offering a rare glimpse into the minds of industry leaders shaping the future of HVAC through innovation, expertise, and an unwavering commitment to quality. Listeners will emerge with a deeper understanding of custom air handling units, equipped with the insights needed to navigate the complexities of modern HVAC systems, ensuring success in their projects and career advancements.

For more HVAC content, you can visit our YouTube channel here: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

The Engineers HVAC Podcast: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products and Controls in NC, SC, GA): Website: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products and Controls in VA, TN, MD, AL): ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠www.hobbsassociates.com⁠

Welcome to another insightful episode of our HVAC-focused podcast. In this episode, we dive deep into the crucial concepts of dry bulb, wet bulb, and humidity—three key properties of air that every HVAC professional must understand.

In this episode, we unravel the mysteries behind these terms, explaining how dry bulb temperature is the reading most of us are familiar with on a thermometer and the cornerstone of HVAC system control.

We delve into the concept of wet bulb temperature, measured with a wet wick thermometer, representing the temperature of the air when water evaporates, and discuss the importance of humidity or the amount of moisture in the air.

Understanding the intricate relationship between these properties is not just academic; it's a practical necessity for efficient HVAC operation. We explore real-world scenarios, demonstrating how the interplay between humidity and dry and wet bulb temperatures dictates the most effective cooling strategies.

Whether facing a high humidity challenge requiring dehumidification or selecting the appropriate HVAC equipment for varying environmental conditions, this episode equips you with the knowledge to make informed decisions.

Moreover, we highlight why mastering these concepts is essential for ensuring comfort, efficiency, and health in the spaces we manage. This discussion is not just technical but is filled with actionable insights for selecting and operating HVAC systems in any condition.

Don't miss this opportunity to enhance your understanding of HVAC systems and the properties of air that influence them.

Whether you're a seasoned professional or new to the field, this episode is valuable for elevating your HVAC knowledge and skills. Join us as we continue to explore the science and technology that keep our environments comfortable and sustainable.

For more HVAC content, you can visit our YouTube channel here: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

The Engineers HVAC Podcast: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products and Controls in NC, SC, GA): Website: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products and Controls in VA, TN, MD, AL): ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠www.hobbsassociates.com⁠

This podcast episode provides substantial value to HVAC industry professionals, especially mechanical engineers and contractors, by offering a deep dive into the current and upcoming trends in heat pump technology.

Host Tony Mormino, alongside guest Sal Brunetto, National Sales Manager, BOSCH Home Comfort USA, explores various aspects of heat pump applications, including air-cooled, water-cooled, and innovative heat pump water heaters, highlighting Bosch's contributions to this evolving field.

Here are some of the key insights from this podcast.

Heat pumps are significant in the electrification and decarbonization movements, which aim to reduce carbon emissions through more efficient heating solutions.

The advancements in heat pump technology, including Bosch's involvement in creating products that operate efficiently in cold climates, address the industry's challenge of providing consistent heating in lower temperatures.

The introduction of Bosch's heat pump hybrid water heater, the GreenTronic 7000T, illustrates how it operates more efficiently than traditional electric water heaters by utilizing a heat pump mechanism.

The considerations for transitioning from gas to electric heating systems, including the implications for electrical service upgrades and the challenges manufacturers face with refrigerant transitions due to environmental regulations.

Bosch's commitment to innovation and its approach to meeting future demands for low GWP (Global Warming Potential) refrigerants highlights the industry's push towards more sustainable solutions.

Water source heat pumps are used in residential and commercial applications, offering an alternative to air-cooled systems in environments where air-cooled systems may not be viable.

This episode is particularly valuable for professionals interested in staying ahead of technological advancements in HVAC systems, understanding the impact of regulatory changes on refrigerants, and exploring sustainable heating solutions. The discussion also sheds light on Bosch's initiatives to support education in the HVAC trade, exemplifying the industry's role in fostering the next generation of professionals.

By listening to this podcast, HVAC professionals can enhance their knowledge of current trends, prepare for upcoming industry shifts, and explore opportunities for integrating more efficient and sustainable heating solutions into their projects.

For more HVAC content, you can visit our YouTube channel here: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

The Engineers HVAC Podcast: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products and Controls in NC, SC, GA): Website: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products and Controls in VA, TN, MD, AL): ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠www.hobbsassociates.com⁠

The latest episode of the Engineers HVAC Podcast, hosted by Tony Mormino, serves as an educational and empowering session for HVAC industry professionals, specifically mechanical engineers and mechanical contractors.

Our guest today is Clifton Beck, an HVAC refrigerant and training expert, and the episode dives into several key areas that are of high value to its audience:

1. A2L Transition and R-410A Transition: The podcast meticulously covers the transition from R-410A to A2L classified refrigerants, focusing on important dates, the significance of the A2L classification, and how it affects transportation and training. This segment is crucial for professionals seeking to stay ahead by understanding regulatory changes and their implications on HVAC systems.

2. Education on Refrigerant Transition: Beck's insight into the current refrigerant transition, drawing from his experiences with past transitions (e.g., CFC and HCFC phase-outs), offers a rich educational perspective. He discusses the necessity of understanding new refrigerants like R-32 and R-454B, which are replacing R-410A, due to their lower Global Warming Potential (GWP). This information is valuable for professionals making informed decisions about refrigerant use and compliance with environmental regulations.

3. Training and Certification: The episode emphasizes the importance of training and certification, especially concerning the new refrigerants and their safe handling. This is particularly beneficial for contractors and engineers looking to update their skills and knowledge base to remain competitive and competent.

4. Q&A Segment: The live Q&A session, addressing questions from the audience, adds a practical and interactive element to the podcast. This helps clarify doubts and engages the community in meaningful discussions about challenges and solutions in the HVAC industry.

5. PDH Presentation: Offering a Professional Development Hours (PDH) certificate for listeners who email the host after the presentation adds educational value, encouraging professional growth and continuous learning among industry practitioners.

By listening to this episode, HVAC professionals will gain insights into industry trends, regulatory changes, and technological advancements. The emphasis on education, training, and community engagement positions this podcast as a valuable resource for those looking to navigate the complexities of the HVAC industry successfully.

For more HVAC content, you can visit our YouTube channel here: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

The Engineers HVAC Podcast: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products and Controls in NC, SC, GA): Website: ⁠⁠⁠⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products and Controls in VA, TN, MD, AL): ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠www.hobbsassociates.com⁠

In this informative and engaging episode of Tony Mormino's live LinkedIn podcast, viewers are treated to a rich blend of industry insights, educational content, and personal reflections.

Tony delves into the latest developments on A2L refrigerants, unveiling the transition towards low GWP alternatives and outlining the regulatory milestones that impact the HVAC community.

He announces an exciting new podcast tailored for the New York City engineering market, aimed at providing PDH credits to address the unique challenges and regulations of the state.

Through practical examples and discussions from the total cooling equation to make-up air unit sequences, Tony breaks down complex technical topics, making them accessible and insightful for professionals at all levels.

Additionally, Tony shares inspirational quotes and personal anecdotes, highlighting the importance of community, hands-on experience, and soft skills in the technical world.

This episode promises to educate, inspire, and empower viewers with the latest industry knowledge and professional wisdom.

Whether you're an HVAC engineer, contractor, or account executive, today's social media platforms are a great way to grow your personal and professional brand.

Listen to this "On the Go" episode as we share industry secrets to growing your online community and building your brand.

For more HVAC content, you can visit our YouTube channel here: ⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠⁠⁠⁠⁠

The Engineers HVAC Podcast: ⁠⁠⁠⁠⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products and Controls in NC, SC, GA): Website: ⁠⁠⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products and Controls in VA, TN, MD, AL): ⁠⁠⁠⁠⁠⁠⁠⁠⁠www.hobbsassociates.com⁠

Join us in this informative presentation by Mark W. Fly, P.E., a distinguished lecturer at ASHRAE, as he delves into the intricate world of air-conditioning and heat pump ratings.

Here are the five learning objectives of this video:

1. What are Certified Ratings, and where did they come from?

2. What are the different rating metrics for full load and part load performance of Air Conditioners and Heat Pumps?

3. What environmental conditions are these units tested at to develop the ratings?

4. What do the ratings cover and don’t cover?

5. How do these ratings affect systems' energy consumption and overall building performance?

You can watch the full video version of this podcast on our YouTube Channel: ⁠⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠⁠⁠⁠

The Engineers HVAC Podcast: ⁠⁠⁠⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products and Controls in NC, SC, GA): Website: ⁠⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products and Controls in VA, TN, MD, AL): ⁠⁠⁠⁠⁠⁠⁠⁠www.hobbsassociates.com⁠

In this comprehensive talk, you'll gain insights into certified HVAC ratings, the development process behind unit ratings, and the standards set by organizations like ASHRAE, AHRI, and the US Department of Energy.

Learn about the various rating metrics, testing procedures, and the impact of these ratings on energy consumption and building performance. With decades of experience and involvement in industry organizations, Mark provides valuable expertise on how these ratings affect HVAC products' efficiency, compliance, and overall performance.

Whether you're a professional in the HVAC industry or simply interested in understanding the complexities of air-conditioning and heat pump systems, this presentation offers essential knowledge and practical insights. Don't miss out on this opportunity to expand your understanding of HVAC ratings and their significance in today's energy-conscious world.

For inquiries, contact Mark W. Fly at mfly@AAON.com.

In this LIVE PDH Marathon podcast, we delve into the crucial topic of attracting the next generation of HVAC engineers and technicians. Join us as we navigate through various key points:

Exploring Skilled Trades in HVAC: We'll dissect the different skilled trades within the HVAC industry and their profound impact.

Understanding Generational Perspectives: Dive into the differences between Baby Boomers, Gen X, and Millennials and how these generational shifts influence the HVAC industry.

Addressing the Unfilled Jobs Crisis: We'll confront the alarming statistic of unfilled HVAC technician positions and its implications for the industry.

The Great Debate: College vs. Trade School: Engage in a lively discussion on the merits of higher education versus vocational training in HVAC careers.

Innovative Outreach Strategies: Discover creative methods for engaging Millennials and Gen Z in the HVAC field, including leveraging social media and educational initiatives.

Expert Advice for Aspiring Technicians: Our panelists share invaluable tips and guidance for individuals considering an HVAC career.

Engaging the MEP Community: Explore the importance of connecting with the Mechanical, Electrical, and Plumbing communities and gathering insights from engineering professionals.

Navigating Perceptions vs. Reality in HVAC Sales: Gain insights into the diverse backgrounds and career paths of HVAC account executives and sales engineers.

Interactive Q&A Session: Pose thought-provoking questions to the audience and encourage active participation.

Join us for a deep dive into the challenges and opportunities facing the HVAC industry as we strive to attract the next generation of talented professionals. Don't miss out on this enriching discussion!

Connect with our guests:

Greg Crumpton: greg@gregcrumpton.com Andrew Brown: andrew@toolfetch.com Michael Morris: mmorris@hobbsassociates.com Host: Tony Mormino | tmormino@insightusa.com

In this podcast, Tony Furst with Armstrong Fluid Technologies dissects the universal Hydronics equation. We review when, why, and how to use this equation.

You can watch the full video version of this podcast on our YouTube Channel: ⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠⁠⁠

The Engineers HVAC Podcast: ⁠⁠⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products and Controls in NC, SC, GA): Website: ⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products and Controls in VA, TN, MD, AL): ⁠⁠⁠⁠⁠⁠⁠www.hobbsassociates.com⁠

The Universal Hydronics Formula, often called the "Hydronic Formula," is a fundamental equation used in hydronic heating and cooling systems. These systems utilize water or another liquid as a heat transfer medium to provide heating, cooling, or both to a building or space. The formula helps calculate the energy transfer in such systems and is essential for designing and optimizing their performance.

The Universal Hydronics Formula is expressed as Q = 500 x GPM x dT.

Where:

Q is the heat transfer rate in British Thermal Units per hour (BTU/hr).

ΔT is the temperature difference between the supply and return water (in degrees Fahrenheit).

GPM is the flow rate of the heat transfer medium in gallons per minute.

500 comes from one gallon of water that weighs 8.33 pounds (the weight of water at 60F) times 60 minutes in one hour times the specific heat of water.

It breaks down like this: 500 = 8.33 lbs/gallon x 60 minutes/hour x 1.0 Btu/lb/F

Specific heat refers to the amount of heat energy required to raise the temperature of one pound of a substance by one degree Fahrenheit.

Please note that the specific heat will change if you have glycol or any other fluid than water.

This formula calculates the amount of heat energy transferred through the hydronic system per unit of time. It considers the temperature difference between the input and output water, the heat transfer medium's flow rate, and the medium's specific heat.

Using this formula, engineers and designers can accurately size components of a hydronic system, such as pumps, pipes, and heat exchangers, to ensure efficient heat transfer and optimal system performance. Additionally, it helps determine the heating or cooling capacity required to meet the comfort needs of a building or space.

This insightful podcast delves into commercial HVAC controls, taking you on a journey from the basics to advanced concepts.

Our guests, Kirk Patton and Chris Adams, PE, with Insight Partners, boast a combined experience of over 40 years in the field, making them the go-to experts for understanding the complexities of today's HVAC control systems.

You can watch the full video version of this podcast on our YouTube Channel: ⁠⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠⁠

The Engineers HVAC Podcast: ⁠⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products and Controls in NC, SC, GA): Website: ⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products and Controls in VA, TN, MD, AL): ⁠⁠⁠⁠⁠⁠www.hobbsassociates.com⁠

In this episode, we give a brief overview of the R410A phase-down dates and the challenges with transitioning to R32 & R454B, and we review the ASHRAE 34 classification of A2L refrigerants.

Thank you for listening, and we hope you enjoy this episode.

The Engineers HVAC Podcast:⁠⁠⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠⁠⁠

Check out our YouTube Channel, HVAC-TV:⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products in NC, SC, GA): Website: ⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products in VA, TN, MD, AL): ⁠⁠⁠⁠⁠⁠⁠www.hobbsassociates.com⁠⁠

In this episode, Abby Massey, PE, PMP, LEED AP, explains how Engineering Firms and Contractors can utilize the 179D Energy Efficiency Tax Deduction to secure work and increase their bottom line.

Abby Massey, PE, PMP, LEED AP, is the Tax Incentives Director for Tax Talker and shares her years of experience with sustainability and energy efficiency, and the Inflation Reduction Act will walk us through the following:

What is 179D, How is it Calculate, What is the Process for Taking a client through a 179D Study, How do Design Firms Qualify, How do Contractors Qualify, Changes to 179D from the IRA (Inflation Reduction Act).

Here is a detailed explanation of Section 179D Energy Efficient Tax Deduction.

The Section 179D tax deduction is a compelling federal tax incentive for companies designing and constructing energy-efficient systems in commercial buildings. Specifically, Section 179D is eligible for work performed on three systems; interior lighting, HVAC (heating, cooling, and ventilation), hot water, and building envelope.

For properties placed into service in 2022 and prior, a tax deduction of up to $1.80 per square foot is available for installing these systems, which results in 50% or greater energy savings compared to a baseline standard. There is eligibility to claim a $0.60 per square foot deduction for upgrades that result in less energy savings. Properties placed into service in 2021 or 2022 are adjusted for inflation, resulting in a higher deduction rate.

Thanks to the Inflation Reduction Act of 2022, properties placed into service in 2023 or later can now achieve a tax deduction of up to $5 per square foot for achieving 50% or greater energy savings. There is eligibility to claim a $2.50 per square foot deduction for upgrades that result in a 25% energy savings, with an additional $0.10 per square foot for every 1% increase in savings.

Qualifying Projects. New construction, renovations, and additions to commercial or high-rise residential buildings most often qualify. At the time of construction or as part of an upgrade process, energy-efficient building systems must be installed that reduce the property’s energy profile compared to a baseline standard. The energy reduction requirement varies based on the energy-efficient system installed in the project. The baseline standard (ASHRAE 90.1) measures the energy savings changes depending on the year the project was completed.

Who Qualifies? Many companies can qualify to claim the Section 179D deduction. In addition to commercial building owners, other companies such as architects, engineers, general contractors, construction managers, energy service providers, and specialty contractors (mechanical, electrical, glazing, etc.) may qualify for their work on buildings owned by government and non-profit entities. In other words, the powerful savings potential is also available to those involved in the design and construction industry.

This video is eligible for PDH credits in most states.

If you need help with 179D, please reach out to us today.

For support on navigating this tax code contacts are as follows:

Insight Partners in Carolinas, Georgia: ⁠⁠www.insightusa.com⁠⁠

Hobbs & Associates in VA, TN, MD, and AL: ⁠www.hobbsassociates.com⁠⁠

Energy Transfer Solutions in the Tri-State area of Pennsylvania, Delaware, and New Jersey: ⁠⁠www.etshvac.com⁠⁠

Klima New Jersey LLC: ⁠⁠www.klimanj.com⁠⁠

Klima New York, LLC: ⁠⁠www.Klimany.com⁠⁠

Etairos HVAC in Tennessee, Mississippi, and Arkansas: ⁠⁠www.etairoshvac.com

Alternatively, don't hesitate to contact Abby Massey with Tax Talker at abby@taxtaker.com.

In this episode, Jim Dale from LG Electronics USA shares insights into the surge in demand for heat pump chillers in the United States.

The interview highlights vital points, such as the substantial increase in heat pump chiller demand, LG currently having $5,000,000 worth of heat pump chillers in stock, and the versatile applications of these products for dedicated heating, dedicated cooling, and changeover scenarios.

Additionally, Jim elaborates on the benefits of employing inverter-driven chillers in mission-critical settings that rely on a backup generator.

Where to find support for LG HVAC products:

Insight Partners in Georgia: ⁠www.insightusa.com⁠

Hobbs & Associates in VA, TN, MD, and AL: www.hobbsassociates.com⁠

Energy Transfer Solutions in the Tri-State area of Pennsylvania, Delaware, and New Jersey: ⁠www.etshvac.com⁠

Klima New Jersey LLC: ⁠www.klimanj.com⁠

Klima New York, LLC: ⁠www.Klimany.com⁠

Etairos HVAC in Tennessee, Mississippi, and Arkansas: ⁠www.etairoshvac.com

In this live AHR Expo interview, we speak with Mike Peterson, VP of Climate by Design International, one of the world's largest manufacturers of active desiccant air handlers.

This video will teach you about low dewpoint active desiccant commercial HVAC air handlers.

Some typical applications for active desiccant HVAC products are surgery suites, archival storage, ice rinks, wastewater treatment plants, art galleries, or any applications requiring a space dewpoint of less than 45F.

Thank you for listening, and we hope you enjoy this episode.

The Engineers HVAC Podcast:⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Check out our YouTube Channel, HVAC-TV:⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products in NC, SC, GA): Website: ⁠⁠⁠⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products in VA, TN, MD, AL): ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠www.hobbsassociates.com⁠⁠

In this episode, I interview Tony Furst and Tunji Asiwaju with Armstrong Fluid Technologies as they unveil the next generation of HVAC pump motor technology.

Thank you for listening, and we hope you enjoy this episode.

The Engineers HVAC Podcast:⁠⁠⁠⁠⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠⁠⁠⁠⁠

Check out our YouTube Channel, HVAC-TV:⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products in NC, SC, GA): Website: ⁠⁠⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products in VA, TN, MD, AL): ⁠⁠⁠⁠⁠⁠⁠⁠⁠www.hobbsassociates.com⁠⁠

In this episode, I interview David Romeo with Miller Leaman, manufacturer of the Thompson Strainer and the Miller Leaman Turbo Disc.

Thank you for listening, and we hope you enjoy this episode.

The Engineers HVAC Podcast:⁠⁠⁠⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠⁠⁠⁠

Check out our YouTube Channel, HVAC-TV:⁠⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products in NC, SC, GA): Website: ⁠⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products in VA, TN, MD, AL): ⁠⁠⁠⁠⁠⁠⁠⁠www.hobbsassociates.com⁠⁠

In this episode, I interview MGM Curbs, a manufacturer of custom roof curbs. We discuss the final filter curb construction and application.

Thank you for listening, and we hope you enjoy this episode.

The Engineers HVAC Podcast:⁠⁠⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠⁠⁠

Check out our YouTube Channel, HVAC-TV:⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products in NC, SC, GA): Website: ⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products in VA, TN, MD, AL): ⁠⁠⁠⁠⁠⁠⁠www.hobbsassociates.com⁠⁠

We recorded this LIVE yesterday at the Fellowes Brands headquarters in Chicago while here for the AHR Expo.

In this LIVE Breaking New episode, we discuss the following topics:

AHR Expo 2024 Industry Trends, HVAC Equipment Expected Lifespan, Sensible Heat Equation (1.085, 1.08, 1.1)

In this episode, my guest and I share our real-life experience with heat pump installation and operation in both warm and cold climates.

Our guest for this episode is Howard Bynder, Owner of The Bee HVAC in Golden, Colorado, and host of The HVAC Dope Show.

Heat pumps have been in use for decades now. But why all the fuss lately around heat pump applications?

Two words: Electrification and Decarbonization.

Electrification involves substituting traditional energy sources with electricity to reduce reliance on fossil fuels and mitigate environmental impact. It is evident in the growing adoption of electric vehicles, electric heating, and electrified public transportation.

Simultaneously, decarbonization minimizes carbon dioxide emissions by transitioning to low-carbon alternatives and implementing sustainable practices. This movement includes a shift to renewable energy sources like solar and wind and efforts to enhance energy efficiency and promote eco-friendly practices in various sectors.

Heat pumps are considered more energy-efficient than traditional heating or cooling systems because they move heat rather than generate it. They are environmentally friendly, as they can be powered by electricity from renewable sources. Heat pumps are increasingly popular for residential, commercial, and industrial applications as part of efforts to reduce energy consumption and lower greenhouse gas emissions.

In regions with extremely cold temperatures, it's essential to consider the specific requirements and features of the heat pump system. Some advanced heat pump models are designed to operate efficiently in colder conditions, incorporating technologies like variable-speed compressors and improved defrost cycles to enhance performance.

Overall, advancements in heat pump technology continue to address the challenges of cold climates, making them viable and energy-efficient heating solutions even in regions with harsh winter conditions. Regular maintenance and proper sizing of the heat pump system are crucial to ensure optimal performance, regardless of the climate.

How to reach our guest Howard Bynder:

Email: howard@thebeehvac.com

Website: www.thebeehvac.com

YouTube Channel: https://www.youtube.com/thehvacdopeshow

Connect With Tony on LinkedIn: ⁠https://www.linkedin.com/in/tony-mormino⁠

The Engineers HVAC Podcast:⁠⁠⁠⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠⁠⁠⁠

Check out our YouTube Channel, HVAC-TV:⁠⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products in NC, SC, GA): Website: ⁠⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products in VA, TN, MD, AL): ⁠⁠⁠⁠⁠⁠⁠⁠www.hobbsassociates.com⁠⁠

In this Live episode of The Engineers HVAC Podcast, we cover the following topics: 

The Refrigerant transition continues, EPA extends high GWP refrigerant sell through., HVAC trends to look for in 2024. 

Thank you for listening, and we hope you enjoy this episode.

Connect On LinkedIn: https://www.linkedin.com/in/tony-mormino

The Engineers HVAC Podcast:⁠⁠⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠⁠⁠

Check out our YouTube Channel, HVAC-TV:⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products in NC, SC, GA): Website: ⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products in VA, TN, MD, AL): ⁠⁠⁠⁠⁠⁠⁠www.hobbsassociates.com⁠⁠

Explore the intricate world of HVAC standards with Mark Fly, PE, Executive Director at AAON, as he delves into the fascinating realm of ASHRAE's System Steering Committee.

Mark shares insights gathered over 12 years of committee work in this thought-provoking lecture, shedding light on the challenges faced in shaping industry standards.

Join Mark as he candidly discusses his upcoming talk at a Washington, DC, conference and the origins of this presentation.

Drawing inspiration from renowned figures like Thomas Jefferson, Mark humorously navigates the difficulties of condensing crucial information into a mere 15 minutes.

Learn about the ASHRAE Distinguished Lecture program, where Mark highlights the significance of the lecture being sponsored by the society and its Chapter Technology Transfer Committee. Gain insights into the inner workings of ASHRAE's regional vice chairman chapter and the vital role played by committees in driving technological advancements.

Whether you're a seasoned professional or a newcomer to HVAC standards, this lecture offers a unique perspective on the industry's evolving landscape. Don't miss out on this enriching talk that promises to unravel the complexities of HVAC standards and the collaborative efforts behind shaping the future.

We hope you enjoy Mark Fly's engaging discussion on ASHRAE's System Steering Committee and gain a deeper understanding of these committees' pivotal role in shaping the HVAC industry.

Watch the video of this presentation on our YouTube Channel: https://youtu.be/2sdtMA31HbY

In this special LIVE on LinkedIn episode, I share four HVAC breaking news stories of the day.

We start by discussing AHR Expo dates, location, and related stats.

I also read a few excellent articles from the November 2023 edition of the ASHRAE Journal.

One is called Avoiding Wet & Moldy AHUs In Critical-Care Facilities by Daivd Schurk.

The other featured article is called Hidden Figures in HVAC - David Nelson Crosthwait, Jr. (This is a great story, by the way!). This article was written by Janice K. Means, P.E.

We finish with a quick reminder of the high GWP phase-down dates and A2L refrigerant deadlines.

In this episode Tony Mormino is a guest on Armstrong Fluid Technologies Annual Fireside Chat Podcast with Tony Furst, Application Engineer Team Leader, Armstrong Fluid Technologies, and John Stischok P.E., Application Engineer, Armstrong Fluid Technologies, where they discuss the importance of training in the HVAC industry and what to look forward to in 2024. 

Thank you for listening and we hope you enjoy this episode.

The Engineers HVAC Podcast:⁠⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠⁠

Check out our YouTube Channel, HVAC-TV:⁠⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products in NC, SC, GA): Website: ⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products in VA, TN, MD, AL): ⁠⁠⁠⁠⁠⁠www.hobbsassociates.com⁠⁠

In this "on the go" episode of The Engineers HVAC Podcast, we talk about the unique principles behind infrared heating systems.

Commercial infrared heaters, operate differently from traditional heaters, utilizing a unique heat, transfer method called radiant heating.

Common applications for this technology would be warehouses and factories, outdoor patios and terraces, agricultural buildings, sports facilities, gymnasiums, and also work rooms and garages.

Overall, commercial infrared heaters offer unique and efficient heating solutions due to their targeted heating approach, energy, saving benefits in rapid heat delivery.

Welcome to the Engineers HVAC Podcast with Tony Mormino.

In this brief, 15-minute “on the go” episode we delve into the world of heat pumps. Recorded straight from our walking trial, the quality might not be studio-level, but I'm committed to sharing timely insights wherever I am.

Join me as we explore the history of heat pumps, their functionality, various types, efficiency considerations, and their role in the decarbonization movement.

Stick around for a clear explanation of supplemental or emergency heat in heat pumps. Thanks for listening – I hope you find this information both valuable and insightful!

In this podcast episode, we get back to basics and show you how to calculate CFM and tons of refrigeration.

Here is what you will learn.

Section 1 Air Mixing. Mixing air on the psychrometric chart.

Section 2 Calculating SHR. The sensible heat ratio is one of the most important HVAC aspects of the psych chart.

Section 3 Calculating CFM utilizing the sensible heat equation.

Section 4 Calculating tons of refrigeration using enthalpy and the total cooling equation.

Bonus section: Why systems fail at part load.

You can watch the full video version of this podcast on our YouTube Channel: ⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠

The Engineers HVAC Podcast: ⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products in NC, SC, GA): Website: ⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products in VA, TN, MD, AL): ⁠⁠⁠⁠⁠www.hobbsassociates.com⁠

Designing systems for full load is easy, but part load is not so much. Understanding the Sensible Heat Ratio, the Sensible Heat Equation, and the Total Cooling Equation is fundamental to understanding what happens at part load.

To get the most out of this class and follow along, you can print out a copy of our Psych Chart here: https://www.insightusa.com/psychcharts

The sensible heat ratio (SHR) is a term used in heating, ventilation, and air conditioning (HVAC) design to describe the ratio of sensible heat to total heat (sensible plus latent heat) in the air. It is an important parameter to consider when designing HVAC systems because it helps engineers and designers understand the thermal characteristics of the air and make informed decisions about system capacity and performance.

In HVAC design, the SHR is essential for several reasons:

Equipment Sizing: The SHR helps determine the appropriate capacity of heating and cooling equipment. Air conditioning systems should be sized to provide the necessary sensible cooling (temperature control) and latent cooling (humidity control). A higher SHR indicates a greater need for sensible cooling.

Comfort Control: Knowing the SHR helps HVAC designers create indoor environments that are comfortable and meet occupant requirements. For example, in a dry climate with a low SHR, more emphasis may be placed on sensible cooling to maintain a comfortable temperature.

Energy Efficiency: Understanding the SHR can help optimize HVAC system performance. By designing systems with the right balance of sensible and latent cooling, energy consumption can be minimized, leading to cost savings.

Dehumidification: In areas with high humidity levels, it's crucial to consider the latent cooling capacity of the HVAC system to effectively remove moisture from the air and prevent issues like mold growth and discomfort.

In summary, the sensible heat ratio (SHR) is a key parameter in HVAC design that helps determine the balance between sensible and latent heat in the air. It guides equipment sizing, energy efficiency considerations, and comfort control strategies to ensure effective temperature and humidity control in indoor spaces. Different regions and applications may require different SHR values, making it an important factor to consider when designing HVAC systems.

This podcast episode is a beginner's introduction to the psychrometric chart.

Here is what you will learn.

Section 1: Properties of Air.  We explain the difference between Dry Bulb, Wet Bulb, Relative Humidity, Humidity, and Dew Point.

Section 2: Building the Psychrometric Chart. A psychrometric chart is a graphical representation of the psychrometric processes of air. See how the psychrometric properties make up the chart.

Section 3: We look at psychrometric processes such as cooling, heating, humidification, dehumidification, cooling, and dehumidification.

Section 4: Relative Humidity vs. Dew Point.

You can watch the full video version of this podcast on our YouTube Channel: ⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠

The Engineers HVAC Podcast: ⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products in NC, SC, GA): Website: ⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products in VA, TN, MD, AL): ⁠⁠⁠⁠⁠www.hobbsassociates.com⁠

Understanding psychrometrics and the properties of air is fundamental to maintaining and controlling space conditions. Designers often rely on software to calculate the critical values related to cooling, heating, humidifying, and dehumidifying, but do we know how those measurement values are determined?

Even though psychrometric charts can be intimidating, we’ll demystify the information they contain. You’ll finish the session with a better understanding of psychrometric charts, the properties of air, and the fundamental processes that drive climate control in a modern building.

In this episode, our guest is Kevin Lance with LG, and he gives us a quick rundown on heat pump chillers in terms of function and when you would use them. 

For support on your next Heat Pump Chiller project, please reach out to:

Insight Partners, established in 2016, is a recognized leader in HVAC with a reputation for innovation and expertise at the forefront of advancing HVAC solutions to meet the evolving needs of its customers. With over eight offices, Insight serves HVAC engineers, contractors, and building owners across Georgia, North Carolina, and South Carolina. www.insightusa.com

Hobbs & Associates, with a history of excellence spanning over 39 years, is a leading provider of HVAC services, equipment, and solutions dedicated to delivering innovative and sustainable solutions to clients nationwide. Offices located in VA, TN, MD, and AL. www.hobbsassociates.com

Energy Transfer Solutions is a leading provider of specialty commercial and industrial HVAC equipment and services, serving customers throughout the Tri-State area of Pennsylvania, Delaware, and New Jersey. www.etshvac.com

Klima New Jersey LLC is a leading provider of specialized commercial and industrial HVAC equipment and services in Northern New Jersey. Klima represents manufacturers who share its desire to exceed their customers' expectations. www.klimanj.com

Klima New York, LLC, established in 2011, is an HVAC specialist representing equipment manufacturers and is the leading provider of variable refrigerant flow technology in New York City (Bronx, Brooklyn, Manhattan, Queens, and Staten Island), Long Island, New Jersey, and Connecticut. www.Klimany.com

Etairos HVAC®, founded in 2020, is a manufacturers’ representative specializing in the sales, service, and integration of equipment, components, and aftermarket parts for commercial, institutional, and light industrial HVAC applications. The company customizes high-performance, economical, sustainable HVAC systems for designers, builders, and owners. Serving Tennessee, Mississippi, and Arkansas. www.etairoshvac.com

Heat pumps play a crucial role in the electrification and decarbonization movement, especially in commercial HVAC (Heating, Ventilation, and Air Conditioning) applications. This technology helps reduce greenhouse gas emissions while promoting the transition to cleaner and more sustainable energy sources. Here's how heat pumps fit into this context.

Electrification involves shifting from fossil fuels to electricity as the primary energy source. Heat pumps are highly efficient devices that use electricity to move heat from one location to another. In commercial HVAC, they can replace traditional systems like natural gas or oil furnaces, which are significant sources of carbon emissions. 

Heat pumps are renowned for their high energy efficiency compared to electric strip heat. They can deliver 3 to 4 units of heating or cooling for every 1 unit of electricity consumed, making them significantly more efficient than traditional heating and cooling systems. 

Using heat pumps in HVAC helps decarbonize commercial buildings by reducing carbon emissions associated with heating and cooling. Since heat pumps do not directly burn fossil fuels, they produce no on-site carbon emissions. Their efficiency makes them a key component of efforts to lower the carbon footprint of commercial properties, in line with global climate goals.

This is part 3 of three, where we focus on ASHRAE 34 Flammability Testing and A2L Classification. In this podcast, HVACR expert Don Gillis delves into the R410A transition, emphasizing key milestones and exploring the physical properties of potential replacements like R32 and R454B.

You can watch the full video version of this podcast on our YouTube Channel: ⁠⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠⁠

The Engineers HVAC Podcast: ⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products in NC, SC, GA): Website: ⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠

Hobbs & Assocaited, Inc. (Commercial HVAC Products in VA, TN, MD, AL): ⁠⁠⁠⁠⁠www.hobbsassociates.com⁠

⁠⁠ This live podcast focuses squarely on the ASHRAE 34 A2L classification and its implications across HVAC equipment, mechanical spaces, transportation, storage, and building codes. But what exactly are A2L refrigerants? Named after their ASHRAE safety classification, A2L refrigerants exhibit mild flammability, low toxicity, and a low global warming potential (GWP). This category encompasses hydrofluoroolefins (HFOs) and HFO blends. A2L refrigerants mirror the operational characteristics of legacy refrigerants while presenting a safer profile compared to ammonia and hydrocarbon-based refrigerants. As the world grapples with climate change, A2L refrigerants have emerged as a substitution for older, high-impact refrigerants such as HFCs and HCFCs in air conditioning and commercial refrigeration setups. A2Ls are pivotal in aiding businesses to meet global objectives outlined in agreements like the Montreal Protocol and the Kigali Amendment, as well as regional regulations such as the U.S. AIM Act, Canada’s ODSHAR, and the targets of the EU Green Deal.

In this episode, we dive into the fascinating concept of "Steamification" with our special guest, Patrick Lach, VP of Sales and Business Development for Maxi-Therm. This conversation is a must-listen for HVAC Mechanical Engineers and large commercial building owners who utilize steam as a vital component of their energy systems.

The energy landscape is rapidly evolving, and one innovative approach to achieving energy security without complete reliance on electrification is Steamification. Patrick Lach shares insights into this groundbreaking concept, which envisions a future where decarbonization is not bound to electrical solutions alone.

The Engineers HVAC Podcast: ⁠⁠⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠⁠⁠

Connect with me on LinkedIn: ⁠⁠⁠⁠⁠⁠https://www.linkedin.com/in/tony-mormino⁠⁠⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products in NC, SC, GA): https://www.insightusa.com/

Hobbs & Assocaited, Inc. (Commercial HVAC Products in VA, TN, MD, AL): ⁠⁠⁠⁠⁠⁠https://hobbsassociates.com/

Key Discussion Points:

The Vision of Steamification: Discover how Steamification aims to generate green steam, offering a sustainable energy future freed from electrification constraints.

Versatile Green Steam Sources: Explore how steam can be generated from various green sources, including biomass, biogas, solar, hydrogen, nuclear, waste-to-energy, and more.

Steam's Unique Advantages: Patrick discusses the many advantages of steam, including its ease of transport, safety, reliability, and long-established role in heating and cooling technologies.

Efficiency and Sustainability: Learn about Maxi-Therm's cutting-edge solutions, including a patented 95+% efficient steam generation system and a 100% steam & condensate closed-loop distribution design to reduce energy consumption and carbon emissions.

Real-World Success Stories: Discover how Maxi-Therm's innovative steam solutions have been implemented in prestigious institutions and commercial buildings across North America, such as universities, hospitals, museums, and manufacturing facilities.

Sustainability Benefits: Patrick highlights the environmental benefits of Maxi-Therm's vertical flooded heat exchangers, which include eliminating condensate receivers, reducing air infiltration, and producing zero flash steam losses.

Join us as we explore the world of Steamification and how it can revolutionize energy solutions for large commercial buildings. Patrick's expertise and Maxi-Therm's groundbreaking technology promise to inspire and inform HVAC Mechanical Engineers and building owners seeking sustainable, efficient, and resilient energy systems.

This is part 2 of three, where we focus on the physical properties of R-454B vs. R-410A.

In this podcast, HVACR expert Don Gillis delves into the R410A transition, emphasizing key milestones and exploring the physical properties of potential replacements like R32 and R454B.

You can watch the full video version of this podcast on our YouTube Channel: ⁠⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠⁠

The Engineers HVAC Podcast: ⁠⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠⁠

Insight Partners (Commercial HVAC Products in NC, SC, GA): Website: ⁠⁠⁠www.insightusa.com⁠⁠⁠⁠

Hobbs & Associates, Inc. (Commercial HVAC Products in VA, TN, MD, AL): ⁠⁠⁠⁠www.hobbsassociates.com⁠

This live podcast focuses squarely on the ASHRAE 34 A2L classification and its implications across HVAC equipment, mechanical spaces, transportation, storage, and building codes. But what exactly are A2L refrigerants?

Named after their ASHRAE safety classification, A2L refrigerants exhibit mild flammability, low toxicity, and a low global warming potential (GWP). This category encompasses hydrofluoroolefins (HFOs) and HFO blends. A2L refrigerants mirror the operational characteristics of legacy refrigerants while presenting a safer profile compared to ammonia and hydrocarbon-based refrigerants.

As the world grapples with climate change, A2L refrigerants have emerged as a substitution for older, high-impact refrigerants such as HFCs and HCFCs in air conditioning and commercial refrigeration setups. A2Ls are pivotal in aiding businesses to meet global objectives outlined in agreements like the Montreal Protocol and the Kigali Amendment, as well as regional regulations such as the U.S. AIM Act, Canada’s ODSHAR, and the targets of the EU Green Deal.

This is part 1 of three, where we focus on Phase Down Deadlines, Refrigerant History, and What’s an HFO.

In this podcast, HVACR expert Don Gillis delves into the R410A transition, emphasizing key milestones and exploring the physical properties of potential replacements like R32 and R454B.

You can watch the full video version of this podcast on our YouTube Channel: ⁠⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠⁠

The Engineers HVAC Podcast: ⁠⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠⁠

Connect with me on LinkedIn: ⁠⁠⁠https://www.linkedin.com/in/tony-mormino⁠⁠⁠

Insight Partners (Commercial HVAC Products in NC, SC, GA): Website: ⁠⁠www.insightusa.com⁠⁠⁠

Hobbs & Assocaited, Inc. (Commercial HVAC Products in VA, TN, MD, AL): ⁠⁠⁠www.hobbsassociates.com

This live podcast focuses squarely on the ASHRAE 34 A2L classification and its implications across HVAC equipment, mechanical spaces, transportation, storage, and building codes. But what exactly are A2L refrigerants?

Named after their ASHRAE safety classification, A2L refrigerants exhibit mild flammability, low toxicity, and a low global warming potential (GWP). This category encompasses hydrofluoroolefins (HFOs) and HFO blends. A2L refrigerants mirror the operational characteristics of legacy refrigerants while presenting a safer profile compared to ammonia and hydrocarbon-based refrigerants.

As the world grapples with climate change, A2L refrigerants have emerged as a substitution for older, high-impact refrigerants such as HFCs and HCFCs in air conditioning and commercial refrigeration setups. A2Ls are pivotal in aiding businesses to meet global objectives outlined in agreements like the Montreal Protocol and the Kigali Amendment, as well as regional regulations such as the U.S. AIM Act, Canada’s ODSHAR, and the targets of the EU Green Deal.

In this video, Tony Abate, AtmosAir’s Chief Technology Officer, reviews ASHRAE Standard 241.

Tony worked tirelessly on this committee with Dr. William P. Bahnfleth, Ph.D., P.E., Fellow/Presidential Member ASHRAE, and the rest of the committee to complete this standard in record time.

You can watch the full video version of this podcast on our YouTube Channel: ⁠⁠https://www.youtube.com/@HVAC-TV⁠⁠

The Engineers HVAC Podcast: ⁠⁠https://anchor.fm/engineers-hvac-podcast⁠⁠

Connect with me on LinkedIn: ⁠⁠https://www.linkedin.com/in/tony-mormino⁠⁠

Insight Partners (Commercial HVAC Products in NC, SC, GA): Website: ⁠www.insightusa.com⁠⁠

Hobbs & Assocaited, Inc. (Commercial HVAC Products in VA, TN, MD, AL): ⁠⁠www.hobbsassociates.com

In late 2022, the White House contacted ASHRAE to help prepare for the upcoming expiration of Title 42 (in May 2023) and the end of the COVID public health emergency. The government tasked ASHRAE with the job of creating guidance on how to operate buildings in a way to help prevent the spread of airborne infectious illnesses.

During the pandemic, operators of indoor spaces were completely unprepared on how to mitigate and combat the spread of COVID. Proper guidance on how to make indoor spaces safe from the spread of the virus was inconsistent, and many people used untested technologies and inadequate products which were deemed to be ineffective. As a result, a new standard on how to protect people from the spread of infectious airborne illnesses in indoor spaces was needed and ASHRAE became the guiding force behind this initiative.

By December 2022, ASHRAE assembled a SPC (Special Project Committee) under the leadership of William Bahnfleth, a former ASHRAE president, to serve as the leadership behind establishing the framework for the standard. By invitation only, a committee of industry experts and thought leaders, including Tony Abate, the CTO of AtmosAir, came together to work on outlining the standard.

The development of Standard 214 is a multi-faceted approach to address all types of environments, commercial buildings, residential, retail, healthcare, institutional and many others. The standard touches on many aspects of enhancing indoor environments to reduce the spread of infectious aerosols including:

• Infection Risk Management Mode (IRMM) – Establishes requirements for an infection risk management mode (IRMM), which applies during identified periods of elevated disease transmission risk. Authorities having jurisdiction can determine when the enhanced protections of Standard 241 are required. Resilience (the ability to respond to extreme circumstances outside normal conditions) in indoor air quality control design and operations is introduced.

• Requirements for Equivalent Clean Airflow Rate – Sets requirements for equivalent clean airflow rate target per occupant of pathogen free airflow, reducing the risk of infection.

• Requirements for Use of Filtration and Air Cleaning Technology – Provides extensive requirements for use of filtration and air cleaning (such as HEPA filters, air ionizers, or UV lights) to achieve equivalent clean airflow requirements and be cost effective and operate effectively and safely.

• Planning and Commissioning – Provides assessment and planning requirements for being ready for the times when there is an event with increased disease-causing pathogen transmissions. The standard has a building readiness plan, that documents procedure for assessing existing or new HVAC systems to determine if they are working properly and attributing to the equivalent clean air delivered to spaces.

The minimum ventilation requirements are those as published in Standards 62.1, 62.2, and 170. Also, a minimum filtration requirement is set for MERV A-11.

In this episode, our guest is Mark W. Fly, PE, Executive Director of the Norman Asbjornson Innovation Center & Laboratory at AAON, Inc. With over 40 years of experience in the HVAC industry, Mr. Fly has a wealth of knowledge to share.

YouTube Channel: ⁠https://www.youtube.com/@HVAC-TV⁠

The Engineers HVAC Podcast: ⁠https://anchor.fm/engineers-hvac-podcast⁠

Connect with me on LinkedIn: ⁠https://www.linkedin.com/in/tony-mormino⁠

Insight Partners (Commercial HVAC Products in NC, SC, GA): Website: www.insightusa.com⁠

Hobbs & Assocaited, Inc. (Commercial HVAC Products in VA, TN, MD, AL): ⁠www.hobbsassociates.com

Listen as we discuss “Failure is the Option: How HVAC Mechanical Engineers Can Learn from Failure and Innovate.”

Mark generously imparts his experience and wisdom regarding HVAC design, shedding light on how failures, unwavering determination, and a positive mindset catalyze innovation and triumph.

During our engaging discussion, we explored the following topics:

Recognizing the role of failure in achieving success, distinguishing between acceptable and unacceptable failures, unveiling the power of perseverance in creating favorable circumstances, and grasping the importance of learning from others' mistakes to enhance our success.

This podcast qualifies for PDH credits in most states.

In this episode, our guest is Karine Leblanc, mechanical engineer, best-selling author, international speaker, and national sales manager at iAire. Karine served on the board of directors for ASHRAE from 2014 to 2017 and holds the distinction of becoming the first female Region X director and regional chair since 1959.

She is the published author of How to Be Human in a Technical World, available on Amazon.

Order Book Here! https://www.amazon.com/How-Be-Human-Technical-World/dp/B09RG3K1S5

We live in a technical world. Yet, technical skills can be worthless without human skills. Human skills connect us to our humanity, our personality, and our ability to communicate and interact with others. So why is it that human skills are not even taught in schools?

How to Be Human in a Technical World is a powerful account for the technically minded who want to change their behavior and lives but don’t know where to start. The first step, asserts author Karine Leblanc, is to increase their emotional intelligence and learn her recipe for success with the Six Magic Skills.

Full of real-life stories, research, practical tools, and action steps, this book is the solution to every analytically minded left-brain thinker who desires more from their career, their relationships, and their life.

Empowering, thought-provoking, and inspiring, Leblanc demonstrates step by step how you can develop human skills, track your progress over time, and change the subtle behaviors that are sabotaging you from the inside out.

Karine is the Past-President of the National Speaker Association Los Angeles Chapter. She has received the ASHRAE Distinguished Service Award and John F James International Award.

She is a certified John Maxwell coach, trainer, and speaker, a certified behavioral analysis consultant, a Heroic Public Speaking graduate Alumni, and an eSpeakers certified virtual presenter.

YouTube Channel: https://www.youtube.com/@HVAC-TV The Engineers HVAC Podcast: https://anchor.fm/engineers-hvac-podcast Connect with me on LinkedIn: https://www.linkedin.com/in/tony-mormino Insight Partners (Commercial HVAC Products in NC, SC, GA): Website: www.insightusa.com Hobbs & Assocaited, Inc. (Commercial HVAC Products in VA, TN, MD, AL): https://hobbsassociates.com/

Welcome to The Engineers HVAC Podcast, where we share our HVAC design and application experience. My name is Tony Mormino with Insight Partners, and thanks for joining us. In this episode, we have Steve Levine, the CEO of AtmosAir Solutions, one of the world leaders in creating healthier indoor air environments.

Visit our YouTube Channel, Insight Partners HVAC TV: ⁠⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/InsightPartnersHVACTV⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Insight Partners Website: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Connect with me on LinkedIn: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.linkedin.com/in/tony-mormino⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

View current line card: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.insightusa.com/manufacturers⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Connect to Insight Partners on LinkedIn: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.linkedin.com/company/insightusa⁠⁠⁠⁠⁠⁠⁠

Learn More About AtmosAir Solutions: ⁠https://www.atmosair.com

In this episode, Steve shares his unique insight into IAQ issues faced by cruise ships, planes, and trains and how they use the latest in IAQ technology to create healthier environments in these applications.

Thank you for listening, and I hope that you enjoy it!

In this episode, our guest enlightens us on the latest IAQ technology and how that can be used to monitor and clean indoor air.

Our guest is Tony Abate, the CTO of AtmosAir Solutions, one of the world leaders in creating healthier indoor air environments.

Visit our YouTube Channel, Insight Partners HVAC TV: ⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/InsightPartnersHVACTV⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Insight Partners Website: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Connect with me on LinkedIn: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.linkedin.com/in/tony-mormino⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

View current line card: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.insightusa.com/manufacturers⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Connect to Insight Partners on LinkedIn: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.linkedin.com/company/insightusa⁠⁠⁠⁠⁠⁠

Learn More About AtmosAir Solutions: https://www.atmosair.com

We spend about 90% of our time indoors, so it's important to ensure that the air we breathe is clean and healthy. Unfortunately, the current state of indoor air quality is not good. According to the EPA, indoor air can be up to 100 times more polluted than outdoor air.

Indoor air quality refers to the condition of the air inside buildings and structures, including homes, offices, schools, and public spaces. Several factors contribute to the decline in IAQ, such as inadequate ventilation, outdoor pollution, indoor contaminants, and volatile organic compounds (VOCs) emitted by everyday products. Pollutants like dust mites, pet dander, mold spores, and chemicals from cleaning agents further exacerbate the problem.

Poor IAQ can have profound effects on human health. Research has linked exposure to indoor pollutants to various health issues, including allergies, asthma, respiratory problems, headaches, fatigue, and even more severe conditions like lung cancer. Vulnerable individuals such as children, the elderly, and those with pre-existing respiratory conditions are particularly at risk. With people spending an estimated 90% of their time indoors, addressing and improving IAQ has become urgent.

Monitoring indoor air quality is vital in identifying potential hazards and implementing effective mitigation strategies. Real-time IAQ monitoring can provide valuable data on pollutant levels, humidity, temperature, and ventilation effectiveness. By monitoring these parameters, individuals and building owners can take appropriate measures to reduce exposure to harmful contaminants and maintain a healthier indoor environment.

Advancements in technology have provided us with powerful tools to combat indoor air pollution and ensure cleaner living spaces.

In this podcast, we cover bi-polar ionization technology.

Here's a little bit about that.

Air ions naturally filter pollutants from the air we breathe. In naturally pristine environments, such as high mountain peaks, air ion levels tend to be much higher than in areas that are more highly populated and industrialized, such as urban areas.

These ions exhaust themselves cleaning pollutant-rich air. In indoor environments the problem becomes magnified, because gains in energy efficiency result in losses in natural ventilation — and that boosts pollutant levels in the air we breathe. We then introduce to air, which was less than perfect to begin with, all the contaminants and pollutants created by people’s activities and the materials used to build our homes and buildings — it is also possible for toxins from cleaning products, pesticides and other compounds we use to maintain our homes and buildings to end up in the air we are breathing.

This is why natural ion levels are practically nonexistent in indoor environments; they have been stripped from the atmosphere by the pollutants we have created. AtmosAir technology restores the air in the space you breathe to mountain-pure ion levels while retaining energy-efficient benefits.

In this episode, our guest Roger Dalton, Regional Sales Manager at NanoSox, one of the world's largest manufacturers of fabric air dispersion systems. 

Roger was friendly enough to come on the show and share five reasons why you might consider using fabric duct. 

Visit our YouTube Channel, Insight Partners HVAC TV: ⁠⁠⁠⁠⁠⁠https://www.youtube.com/InsightPartnersHVACTV⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Insight Partners Website: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Connect with me on LinkedIn: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.linkedin.com/in/tony-mormino⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

View current line card: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.insightusa.com/manufacturers⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Connect to Insight Partners on LinkedIn: ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.linkedin.com/company/insightusa⁠⁠⁠⁠⁠⁠

Here is a list of the main reasons for using fabric ducts:

1. Better Performance

2. Condensation free, no insulation

3. Appearance-multiple colors and screen printing for logos, ads, ect

4. Easy, low-cost installs

5. Energy efficient for cost savings

A bit about Nanosox.

Nanosox is a product that offers a superior alternative to traditional metal ductwork. It provides even and comfortable airflow through fabric permeation and multi-row orifices, resulting in precise air throw and a tridimensional air dispersion effect. Unlike metal ductwork, Nanosox covers a larger area with uniform airflow and avoids blockage by commodity shelves.

The Nanosox system is aesthetically pleasing, with multiple color options that blend well with any indoor decoration. It can also be customized and individually designed. In contrast, traditional metal ductwork is disorderly and complicated, with various components and brackets.

Another advantage is that it prevents condensation without the need for insulation. The fabric permeation creates a cooling air layer around the duct surface, eliminating temperature differences. In contrast, traditional metal ductwork often faces condensation problems due to incorrect insulation thickness, substandard quality, or improper installation.

This system is hygienic and easy to clean, contributing to improved indoor air quality and meeting higher health and hygiene standards. On the other hand, traditional metal ductwork requires unique cleaning methods and tools, which can be expensive.

This fabric duct is lightweight, accounting for only a quarter of the weight of traditional metal ductwork. This makes it suitable for applications with limited roof load-bearing capacity, such as new buildings or renovations. Traditional metal ductwork, with its heavy weight and additional components, increases the roof load.

The system operates quietly, using flexible materials and lower air velocity, minimizing noise and resonance transmission. This promotes a better indoor environment than the loud noise generated by metal ductwork and air handling units.

Installation is quick and efficient, thanks to specialized cable and track suspension systems. Material waste is reduced, and the installation time is significantly shorter than traditional metal duct systems that require on-site fabrication.

Nanosox ensures reliable quality through large laser production lines and system simulation platforms. All products are manufactured in the factory to guarantee high-pressure resistance, micro-permeability, and other essential properties. In contrast, traditional metal ducts fabricated on-site lack quality assurance.

This system is environmentally friendly, employing synthetic fabric and green manufacturing practices. It is energy-saving due to its tridimensional and laminar airflow model. Additionally, it simplifies the design by replacing the entire traditional ductwork, resulting in cost reduction through lightweight, easy transportation, and quick installation. Traditional ductwork consumes more materials, accessories, and components, increasing the overall cost.

This video explains how building owners, mechanical engineers, and mechanical contractors can qualify for the 179D tax deduction.

Visit our YouTube Channel, Insight Partners HVAC TV: ⁠⁠⁠⁠⁠https://www.youtube.com/InsightPartnersHVACTV⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠

Insight Partners Website: ⁠⁠⁠⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠⁠⁠

Connect with me on LinkedIn: ⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.linkedin.com/in/tony-mormino⁠⁠⁠⁠⁠⁠⁠⁠⁠

View current line card: ⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.insightusa.com/manufacturers⁠⁠⁠⁠⁠⁠⁠⁠⁠

Connect to Insight Partners on LinkedIn: ⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.linkedin.com/company/insightusa⁠⁠⁠⁠⁠⁠

Our guest is Abby Massey, PE, PMP, LEED AP, the Tax Incentives Director for Calvetti Ferguson Accounting.

If you need help with 179D in NC, SC, and GA, contact Tony Mormino with Insight Partners at tmormino@insightusa.com

Anywhere else, please contact Abby Massey with Calvetti Ferguson at amassey@calvettiferguson.com.

Abby will share her years of experience with sustainability and energy efficiency, and the Inflation Reduction Act will walk us through the following:

What is 179D?

How is it Calculated?

What is the Process for Taking a client through a 179D Study?

How do Design Firms Qualify?

How do Contractors Qualify?

Changes to 179D from the IRA (Inflation Reduction Act)

Here is a detailed explanation of Section 179D Energy Efficient Tax Deduction.

The Section 179D tax deduction is a compelling federal tax incentive available to companies designing and constructing energy-efficient systems in commercial buildings. Specifically, Section 179D is eligible for work performed on three systems; interior lighting, HVAC (heating, cooling, and ventilation), hot water, and building envelope.

For properties placed into service in 2022 and prior, a tax deduction of up to $1.80 per square foot is available for installing these systems, which results in 50% or greater energy savings compared to a baseline standard. There is eligibility to claim a $0.60 per square foot deduction for upgrades that result in less energy savings. Properties placed into service in 2021 or 2022 are adjusted for inflation, resulting in a higher deduction rate.

Thanks to the Inflation Reduction Act of 2022, properties placed into service in 2023 or later can now achieve a tax deduction of up to $5 per square foot for achieving 50% or greater energy savings. There is eligibility to claim a $2.50 per square foot deduction for upgrades that result in a 25% energy savings, with an additional $0.10 per square foot for every 1% increase in savings.

New construction, renovations, and additions to commercial or high-rise residential buildings most often qualify. At the time of construction or as part of an upgrade process, energy-efficient building systems must be installed that reduce the property’s energy profile compared to a baseline standard. The energy reduction requirement varies based on the energy-efficient system installed in the project. The baseline standard (ASHRAE 90.1) measures the energy savings changes depending on the year the project was completed.

Many companies can qualify to claim the Section 179D deduction. In addition to commercial building owners, other companies such as architects, engineers, general contractors, construction managers, energy service providers, and specialty contractors (mechanical, electrical, glazing, etc.) may qualify for their work on buildings owned by government and non-profit entities. In other words, the powerful savings potential is also available to those involved in the design and construction industry.

This video is eligible for PDH credits in NC, SC, GA, and FL.

Join us for an exciting live recording of Podcast Episode 39, titled "HVAC MythBusters Event: Separating Today’s Fact From Fiction." Our panel of experts will debunk five prevalent myths in the HVAC industry.

Here are the myths we'll be addressing: Myth #1: A2L Refrigerants Are Highly Flammable and Dangerous. Myth #2: College Is the Only Path to Success. Myth #3: RH Is an Accurate Way to Measure Humidity. Myth #4: My Digital Compressor Is Short Cycling! Myth #5: Hot Gas Reheat Dehumidifies the Air.

Visit our YouTube Channel, Insight Partners HVAC TV: ⁠⁠⁠⁠https://www.youtube.com/InsightPartnersHVACTV⁠⁠⁠⁠⁠⁠⁠⁠⁠

Insight Partners Website: ⁠⁠⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠⁠

Connect with me on LinkedIn: ⁠⁠⁠⁠⁠⁠⁠⁠https://www.linkedin.com/in/tony-mormino⁠⁠⁠⁠⁠⁠⁠⁠

View current line card: ⁠⁠⁠⁠⁠⁠⁠⁠https://www.insightusa.com/manufacturers⁠⁠⁠⁠⁠⁠⁠⁠

Connect to Insight Partners on LinkedIn: ⁠⁠⁠⁠⁠⁠⁠⁠https://www.linkedin.com/company/insightusa⁠⁠⁠⁠⁠⁠

Tune in to hear Tony Mormino and Rhydon Atzenhoffer share their insights on these misconceptions and other industry-related issues.

This podcast is informative, educational, and eligible for PDH (Professional Development Hour) credits in North Carolina, South Carolina, Georgia, and Florida.

One of the most common mistakes in HVAC system design is the lack of understanding of how equipment reacts at part load. Most equipment is sized for full-load temperature control with minimal attention to part-load temperature and humidity control.

In this episode, we use psychrometrics to explain what happens at part load and the features you want to use to ensure proper temperature and humidity control over all load conditions.

This third installment of our series builds on the information in parts 1 and 2. The links to all three sections are provided below.

Watch Psychrometrics Part 1: https://youtu.be/vd2mPSVqvZ4

Watch Psychrometrics Part 2: https://youtu.be/4Z_usQB9vQ8

Watch Psychrometrics Part 3: https://youtu.be/hhsAsyX3VBc

Download your Psychrometric Chart Here: https://www.insightusa.com/psychrometric-chart-pdf

Visit our YouTube Channel, Insight Partners HVAC TV: ⁠⁠⁠https://www.youtube.com/InsightPartnersHVACTV⁠⁠⁠⁠⁠⁠⁠⁠

Insight Partners Website: ⁠⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠⁠

Connect with me on LinkedIn: ⁠⁠⁠⁠⁠⁠⁠https://www.linkedin.com/in/tony-mormino⁠⁠⁠⁠⁠⁠⁠

View current line card: ⁠⁠⁠⁠⁠⁠⁠https://www.insightusa.com/manufacturers⁠⁠⁠⁠⁠⁠⁠

Connect to Insight Partners on LinkedIn: ⁠⁠⁠⁠⁠⁠⁠https://www.linkedin.com/company/insightusa⁠⁠⁠⁠⁠⁠

We cover the full-load and part-load psychrometric processes of constant volume air handling units, including features like face and bypass and return air bypass. The dehumidification process is explained with varying reheat sources of electric heat, gas heat, and hot gas reheat.

By the end of this episode, you'll have a comprehensive understanding of psychrometrics and be able to apply this knowledge in your field.

Psychrometrics is a branch of thermodynamics that studies air's physical and thermodynamic properties and the relationships between these properties. The word "psychrometrics" comes from the Greek words "psuchron," which means "cold," and "metron," which means "measure." Therefore, psychrometrics is the measurement of the properties of air, including temperature, humidity, and pressure.

One of the most essential tools used in psychrometrics is the psychrometric chart. The psychrometric chart is a graphical representation of the thermodynamic properties of air. It is a chart that displays the relationships between temperature, humidity, and pressure. The chart calculates the various properties of air, including the dew point, relative humidity, and enthalpy.

Download your Psychrometric Chart Here: https://www.insightusa.com/psychrometric-chart-pdf

To use the psychrometric chart, one must first determine the dry-bulb temperature, which is the air temperature as measured by a thermometer. Next, one must determine the wet-bulb temperature, which is the air temperature as measured by a thermometer with a wet wick. These two temperatures are then used to locate the point on the chart that represents the current state of the air.

Once the current state of the air has been located on the psychrometric chart, it is possible to calculate various properties of the air, such as the dew point, relative humidity, and enthalpy. The dew point is the temperature at which the air must be cooled for water vapor to condense into liquid water. The relative humidity is the ratio of the amount of water vapor in the air to the maximum amount of water vapor that could be present at the current temperature and pressure. Enthalpy is the total heat content of the air.

Understanding the psychrometric chart is essential for anyone involved in the design, installation, and maintenance of air conditioning and ventilation systems. It is also essential for anyone working in meteorology, agriculture, and industrial processing, where the properties of air play a crucial role.

In this episode, we interview Greg Crumpton, VP of Service Logic, the largest privately held Energy and HVAC/Mechanical Services company in the United States.

During this podcast, we discuss the skilled trades in the HVAC industry and why there is a shortage of all trades, especially HVAC technicians. The demand for HVAC services has increased significantly in recent years, and the HVAC industry faces a skilled labor shortage.

Visit our YouTube Channel, Insight Partners HVAC TV: ⁠⁠https://www.youtube.com/InsightPartnersHVACTV⁠⁠⁠⁠⁠⁠⁠

Insight Partners Website: ⁠⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠⁠

Connect with me on LinkedIn: ⁠⁠⁠⁠⁠⁠https://www.linkedin.com/in/tony-mormino⁠⁠⁠⁠⁠⁠

View current line card: ⁠⁠⁠⁠⁠⁠https://www.insightusa.com/manufacturers⁠⁠⁠⁠⁠⁠

Connect to Insight Partners on LinkedIn: ⁠⁠⁠⁠⁠⁠https://www.linkedin.com/company/insightusa⁠⁠⁠⁠⁠⁠

Tony Mormino at Insight Partners: tmormino@insightusa.com

We also discuss solutions to address the HVAC skilled trade shortages. One solution is to invest in vocational training programs that teach students the skills they need to become HVAC technicians.

Another solution is to increase awareness about the HVAC industry and the rewarding career opportunities it offers. Many people are unaware of the high demand for HVAC technicians and the good salaries they can earn. The shortage of HVAC technicians is a problem that needs to be addressed, as it is causing delays in services and higher prices for consumers.

By investing in vocational training programs and increasing awareness about the HVAC industry, we can help solve this shortage and ensure people have access to reliable and affordable HVAC services.

The skilled trades, also known as the "trades," refer to various occupations that require specialized skills, knowledge, and training. These occupations typically involve working with one's hands and may require physical strength and stamina.

The HVAC industry offers a range of skilled trades that require specialized training and knowledge. Some of the most common skilled trades in the HVAC industry include:

1) HVAC Technician: HVAC technicians are responsible for installing, maintaining, and repairing heating, ventilation, and air conditioning systems in homes, businesses, and other buildings. They may work with various equipment, including furnaces, boilers, air handlers, and refrigeration systems.

2) Sheet Metal Worker: Sheet metal workers fabricate, install, and maintain sheet metal products, including ductwork, siding, roofs, and gutters. They use specialized tools and equipment to shape and cut metal, and must have a strong understanding of HVAC systems.

3) Pipefitter: Pipefitters install and maintain pipes that carry water, steam, or other materials used in heating and cooling systems. They may also install gas lines and other pipes used in HVAC systems.

4) Refrigeration Technician: Refrigeration technicians specialize in the installation, maintenance, and repair of refrigeration systems, including commercial refrigerators, freezers, and air conditioning systems.

5) Electrician: Electricians work with electrical systems, including those used in HVAC systems. They install and maintain electrical components such as motors, switches, and control systems.

6) Controls Technician: Controls technicians are responsible for installing and maintaining the electronic controls used in HVAC systems. They must have a strong understanding of computer programming and electronics.

So, what’s causing the shortage? Many HVAC technicians are reaching retirement age, and there aren’t enough young people entering the field to replace them. This is partly due to a lack of awareness about career opportunities in HVAC and the lack of vocational training programs in schools.

Tune in to this episode for a roundup of six breaking news stories in the HVAC industry, with each clocking in at under 60 seconds.

You'll hear about a range of topics, including Elon Musk's plans for heat pumps, the EPA's efforts to curb illegal HFC imports, and the rush by states to revise building codes for the safe use of new refrigerants. The episode also covers the ongoing labor shortage in the HVAC industry and reports on the outlook of plumbing, heating, and cooling contractors.

Don't miss out on the latest industry news—subscribe to our podcast today!

Visit our YouTube Channel, Insight Partners HVAC TV: ⁠https://www.youtube.com/InsightPartnersHVACTV⁠⁠⁠⁠⁠⁠

Insight Partners Website: ⁠⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠⁠

Connect with me on LinkedIn: ⁠⁠⁠⁠⁠https://www.linkedin.com/in/tony-mormino⁠⁠⁠⁠⁠

View current line card: ⁠⁠⁠⁠⁠https://www.insightusa.com/manufacturers⁠⁠⁠⁠⁠

Connect to Insight Partners on LinkedIn: ⁠⁠⁠⁠⁠https://www.linkedin.com/company/insightusa⁠⁠⁠⁠⁠

Tony Mormino at Insight Partners: tmormino@insightusa.com

Join us for an informative episode as we welcome Mark Brady, Regional Sales Manager for Nortek Air Solutions, back to the studio. Mark's vast industry knowledge and expertise in array controls are excellent as he breaks down the basics to the advanced. This short yet powerful episode will provide you with a clear understanding of standard fan array electric panels and control options.

You can watch the full video version of this episode on our YouTube Channel, Insight Partners HVAC TV, by clicking on the following link: https://www.youtube.com/InsightPartnersHVACTV⁠⁠⁠⁠⁠

Insight Partners Website: ⁠⁠⁠⁠www.insightusa.com⁠⁠⁠⁠

Connect with me on LinkedIn: ⁠⁠⁠⁠https://www.linkedin.com/in/tony-mormino⁠⁠⁠⁠

View current line card: ⁠⁠⁠⁠https://www.insightusa.com/manufacturers⁠⁠⁠⁠

Connect to Insight Partners on LinkedIn: ⁠⁠⁠⁠https://www.linkedin.com/company/insightusa⁠⁠⁠⁠

Tony Mormino at Insight Partners: tmormino@insightusa.com

Throughout the episode, we touch on fan array motor overload protection, fan array VFD panels, VFD panels with bypass, Fanwall with redundant VFD panels, and multi-drive VFD panels for fan arrays.

Fanwall technology has become increasingly popular among building owners in various commercial and industrial applications such as hospitals, data centers, laboratories, schools and universities, and office buildings. The FANWALL array of fans enables designers to optimize fan wheel geometry and motor horsepower for specific applications, resulting in smaller fans and motors running closer to peak efficiencies, thus reducing energy costs.

Today, we are excited to bring you episode 31, a live recording. I’m Tony Mormino with Insight Partners, and thank you for joining us.

YouTube Channel:⁠⁠⁠https://www.youtube.com/InsightPartnersHVACTV⁠⁠⁠

Insight Partners Website:⁠⁠⁠www.insightusa.com⁠⁠⁠

Connect with me on LinkedIn:⁠⁠⁠https://www.linkedin.com/in/tony-mormino⁠⁠⁠

View current line card:⁠⁠⁠https://www.insightusa.com/manufacturers⁠⁠⁠

Connect to Insight Partners on LinkedIn:⁠⁠⁠https://www.linkedin.com/company/insightusa⁠⁠⁠

Tony Mormino at Insight Partners: tmormino@insightusa.com

Our guest for this episode is the one and only Mark Fly, PE, with over 40 years of experience as a Researcher, Consulting Engineer, Contractor, and Manufacturer in the HVAC industry. Currently, he serves as the Executive Director of the Norman Asbjornson Innovation Center & Laboratory (NAIC) at AAON, Inc. in Tulsa, Oklahoma.

Mr. Fly will share his insights on the challenges associated with regulations, their compliance metrics, and how they often manifest unintended consequences. As we strive to lower building energy and carbon consumption, we must raise the bar on energy efficiency.

In this presentation, Mark will discuss the future development of performance maps for all types of equipment and the better incorporation of control and operation sequences into modeling software. Ultimately, the goal is to reduce the whole-building energy and carbon use, which requires the reliance on whole-building energy modeling combined with continuous commissioning to ensure continued efficient building operation.

Recently, I was a guest on Greg Crumpton's podcast called Straight Outta Crumpton, which is an awesome name. Greg and I had a great conversation about using social media to bring value to and build relationships with the HVAC community. 

Greg is a well-known figure in the HVAC industry, and his podcast has gained nationwide recognition. It was an honor to appear on his show, and I am delighted to share this episode with you.

During our conversation, we discussed the significance of embracing digital technology and social media to communicate one's message effectively.

YouTube Channel:⁠⁠https://www.youtube.com/InsightPartnersHVACTV⁠⁠

Insight Partners Website:⁠⁠www.insightusa.com⁠⁠

Connect with me on LinkedIn:⁠⁠https://www.linkedin.com/in/tony-mormino⁠⁠

View current line card:⁠⁠https://www.insightusa.com/manufacturers⁠⁠

Connect to Insight Partners on LinkedIn:⁠⁠https://www.linkedin.com/company/insightusa⁠⁠

Tony Mormino at Insight Partners: tmormino@insightusa.com

The HVAC industry might not immediately come to mind when thinking about social media Insight Partners has not been camera-shy.

If you want to start building an online community, here are some tips we've learned.

1. Authenticity: Viewers appreciate authenticity in online content. They want a genuine perspective on a topic rather than a staged or overly polished version.

2. Value Over Quality: Never let production quality stop you from posting value-driven content. The quality comes from its value to the viewer—education, entertainment, etc. Don't be the judge; let the audience judge the content.

3. Relatability: Great content comes from the heart and connects to emotional or intellectual truths. This is something that I'm trying to get better at.

4. Relevance: The content should be relevant to its intended audience. It should be something that people can relate to, addressing their interests or concerns.

5. Context: Content should be contextual to your posting platform. LinkedIn - Business Professionals, YouTube - Educational, TikTok - Short vids, high engagement, Facebook - Friends in HVAC biz, Instagram - Visual and Feelings, Twitter - The online water cooler.

6. Resilience: It's ok if something doesn't work. Most of it won't, and that's ok. If you know it's ok to fail; there's nothing to fear, so keep going!

We hope that you find this helpful; thank you for listening!

In this live recording of episode 29, we will discuss the new DOE minimum energy-efficiency standards for single-phase residential air conditioners and heat pumps known as expressed in the new terms EER2, SEER2, and HSPF2.

YouTube Channel:⁠https://www.youtube.com/InsightPartnersHVACTV⁠

Insight Partners Website:⁠www.insightusa.com⁠

Connect with me on LinkedIn:⁠https://www.linkedin.com/in/tony-mormino⁠

View current line card:⁠https://www.insightusa.com/manufacturers⁠

Connect to Insight Partners on LinkedIn:⁠https://www.linkedin.com/company/insightusa⁠

Tony Mormino at Insight Partners: tmormino@insightusa.com

All AHRI standards outlined in this podcast can be downloaded at: https://www.ahrinet.org/ Here is what you will learn from the episode:

1) Review of EER, SEER, and HSPF

2) DOE testing procedures for single-phase products under 65k Btu

3) EER2, SEER2, and HSPF2 and how they affect your business, whether you are a consultant, contractor, or owner

This does qualify for PDH credits, so please email me for your certificate.

Every six years, the Department of Energy (DOE) reanalyzes the effects of energy usage, sets minimum efficiency requirements, and manages the testing standards by which those efficiencies are measured. In 2018 the DOE started the first phase of its six-year plan requiring a 13% increase in energy efficiency for commercially packaged air conditioners, heat pumps, and split systems. The second phase of this plan will start in 2023.

The DOE has also reanalyzed and adjusted the minimum efficiencies of single-phase air conditioners and heat pumps, 5 tons or less. KEY DIFFERENCE: Single-phase and residential products must also comply with a new testing procedure for developing efficiency ratings.

Compared to today’s test procedure, the external static pressure used when testing will be increased by up to 5X, which will more closely represent actual field conditions. Since the new testing requirements are more stringent and reduce the resulting efficiency rating, there will be new metrics and nomenclature — SEER2, EER2, and HSPF2. On the same system, compared to SEER ratings, the new SEER2 ratings will be lower, and the minimum efficiencies will be reduced to account for the more demanding test procedure required for 2023 products.

All “RESIDENTIAL” air conditioners AND Heat Pumps must comply with the Department of Energy’s minimum efficiency standard requirements on January 1st, 2023.

The testing requirements will be more stringent but also more accurate, and the metrics will be referred to as SEER2, HSPF2, and EER2. These testing procedure changes ONLY apply for single-phase equipment less than or equal to 65,000 Btuh.

AHRI 210/240-2023 (2020), first published in May 2020, establishes a method to rate residential central air conditioners and heat pumps consistent with the new DOE test procedure. The energy efficiency metrics, expressed in terms of Seasonal Energy Efficiency Ratio (SEER2), Energy Efficiency Ratio (EER2), and Heating Seasonal Performance Factor (HSPF2), are required for representations coincident with the compliance date of the new efficiency standards in the United States starting on January 1, 2023.

The primary changes in this edition of AHRI 210/240 are those required to align with the new performance metrics and requirements of Appendix M1 of 10 CFR 430 (Code of Federal Regulations), as issued by the U.S. Department of Energy (82 FR 1426, January 2017). A working group of many stakeholders (including but not limited to AHRI members, independent laboratories, energy advocates, and DOE consultants) met periodically over the course of two years to evaluate necessary changes and improvements in language.

Because compliance with the Appendix M1 test procedure and ratings are not mandatory until January 1, 2023, AHRI has chosen “2023” as the year version of this standard.

In this live podcast, we discuss the current R410A phase-down schedule and a review of the properties of the two via low GWP refrigerants R32 and R454B.

YouTube Channel:
https://www.youtube.com/InsightPartnersHVACTV

Insight Partners Website:
www.insightusa.com

Connect with me on LinkedIn:
https://www.linkedin.com/in/tony-mormino

View current line card:
https://www.insightusa.com/manufacturers

Connect to Insight Partners on LinkedIn:
https://www.linkedin.com/company/insightusa

Tony Mormino at Insight Partners: tmormino@insightusa.com

We talk about the status of the current EPA refrigerant regulations, including the EPA's NOPR (notice of proposed rule), the critical milestones for R410A equipment manufacturing, and the current R410A phase downtime schedule.

We also show the properties of the two via R410A alternatives, R32 and R454B. In particular, we show the meaning of A2L refrigerants as explained in ASHRAE 34-2022, Designation and Safety Classification of Refrigerants, which is a shorthand way of naming refrigerants and assigning safety classifications based on toxicity and flammability data.

We delve into the benefits and drawbacks of each low GWP refrigerant, exploring factors such as its global warming potential, energy efficiency, and flammability.

Refrigerants play a critical role in the functioning of air conditioning and refrigeration systems. They are responsible for transferring heat from the indoor or outdoor space to the refrigeration unit, allowing for temperature control. However, the impact of refrigerants on the environment is a growing concern. Many commonly used refrigerants have high global warming potential (GWP), contributing to climate change. In recent years, there has been a push to develop and adopt refrigerants with lower GWP, leading to the emergence of new refrigerants with unique properties.

Two such refrigerants are R32 and R454B. R32 is a pure hydrofluorocarbon (HFC) refrigerant, while R454B is a blend of HFC and hydrofluoroolefin (HFO) refrigerants. While these refrigerants offer lower GWP, they have unique properties that distinguish them from each other.

Both have similar performance to R410A. Both have a similar performance to each other. Both are classified as A2L, mildly flammable refrigerants. Both have a lower GWP than R410A.

R32 is a single-component refrigerant. It is a mildly flammable A2L refrigerant, meaning it can ignite in the presence of an ignition source but only under certain conditions. R32 has a low GWP of 675, making it an attractive option for environmentally conscious companies.

R454B is a zeotropic blend of HFC and HFO refrigerants, 69% R32 and 31% R1234yf. It is a mildly flammable A2L refrigerant with a low GWP of 466. R454B was developed as a potential replacement for high-GWP refrigerants like R410A.

For those of us who have been around awhile, you may be very familiar with R22 and even R12. Past Transitions were driven by Ozone Depletion Potential (ODP).

This podcast is for anyone that wants a brief overview of Natatorium Indoor Pool Design, where we explore the unique nature of indoor pool rooms and the importance of properly sizing and designing HVAC units and systems for these spaces.

Here is a link to the Natatorium Design Guide as presented in this video: https://poolpak.com/natatorium-design-guide/

This design guide was created by PoolPak, a division of Dehumidified Air Solutions, the world's largest manufacturer of indoor pool dehumidification units. 

YouTube Channel: https://www.youtube.com/InsightPartnersHVACTV

Insight Partners Website:
www.insightusa.com

Connect with me on LinkedIn:
https://www.linkedin.com/in/tony-mormino

View current line card:
https://www.insightusa.com/manufacturers

Connect to Insight Partners on LinkedIn:
https://www.linkedin.com/company/insightusa 

Tony Mormino at Insight Partners: tmormino@insightusa.com 

For assistance with our indoor pool dehumidification calculator and to size your commercial dehumidifier for indoor pool, please contact Insight Partners today. 

Unlike other commercial spaces, indoor pool construction and HVAC design present unique challenges. These challenges include controlling humidity levels, maintaining air quality, and ensuring proper ventilation to prevent moisture damage, corrosion, and mold growth.

Our expert team has years of experience helping consulting engineers and contractor design and build natatoriums. We understand the importance of creating a comfortable and safe environment for swimmers and spectators. In this video, we will discuss the essential elements of indoor pool design, including the design of the building itself and the HVAC system required to maintain proper conditions.

We'll explore the importance of factors such as proper insulation, ventilation, and dehumidification, as well as the specific design considerations necessary to create an optimal environment for indoor swimming. We'll also discuss the latest indoor pool dehumidification technologies and how they can be utilized to ensure efficient operation and minimal environmental impact.

If you're involved in the planning and construction of an indoor pool or looking to upgrade your current natatorium, this video is a must-watch. Join us as we explore the unique challenges of indoor pool design and discover the strategies and solutions necessary to create a safe, comfortable, and efficient indoor swimming environment.

The know-how and experience to provide a first-class indoor pool experience exist today. There are hundreds of successful indoor pools currently operating in North America. 

Resources are available to help guide and educate indoor pool designers, operators, and owners. In 2019, ASHRAE created a new chapter in the design handbooks dedicated to indoor pool design. The CDC’s Council for the Model Aquatic Health Code (CMAHC) is also actively working to provide better guidelines on indoor pool design and Indoor Air Quality (IAQ).

In this live podcast, we quickly look at the six most common types of heat pumps used in the HVAC industry today. Heat pumps are gaining popularity as an alternative to traditional gas heating systems as the world moves towards electrification and away from fossil fuels.

YouTube Channel:
https://www.youtube.com/InsightPartnersHVACTV

The Engineers HVAC Podcast:
https://anchor.fm/engineers-hvac-podcast

Insight Partners Website: www.insightusa.com

Tony Mormino at Insight Partners: tmormino@insightusa.com

Connect with Tony on LinkedIn:
https://www.linkedin.com/in/tony-mormino

View current line card:
https://www.insightusa.com/manufacturers

Connect to Insight Partners on LinkedIn:
https://www.linkedin.com/company/insightusa

While heat pumps are not a new technology, first invented in 1856 to dry salt in the Austrian salt marshes, they've come a long way since then. As HVAC professionals, we must stay informed about the different heat pump technologies available today to serve our customers and clients better.

Several heat pump technologies are available, each with advantages and disadvantages. Here are some of the most common types:

1. Air-source heat pumps: This heat pump extracts heat from the outdoor air to heat indoor spaces. They are suitable for moderate climates where temperatures don't drop below zero.

2. Water-source heat pumps: These heat pumps extract heat from water sources, such as a lake or river, or more commonly, water cooled in a cooling tower. They are highly efficient and can be used in all climates but require a nearby water source.

3. Heat Pump Chillers: These are conventional centrifugal chillers modified to serve as heat pumps.

4. Heat Pump Water Heaters: Dedicated heat pumps are designed to transfer heat from the ambient air to water.

5. VRF heat pumps: These systems offer many advantages over traditional ducted systems, such as energy efficiency, individual temperature control, and flexible design. However, they also have disadvantages, such as the higher initial cost and increased maintenance expertise requirements.

6. Ground-source heat pumps: Also known as geothermal heat pumps, these systems extract heat from the ground using a series of pipes buried beneath the surface. They are highly efficient and can be used in all climates but are more expensive to install.

As an HVAC professional, it's essential to stay informed about the latest trends and advancements in the industry to provide our clients with the best possible solutions.

In this episode, we discuss the impending phase-out of R410A refrigerant. As the industry shifts toward more environmentally friendly alternatives, we compare the physical properties of two viable replacements: R32 and R454B.

We delve into the benefits and drawbacks of each refrigerant, exploring factors such as its global warming potential, energy efficiency, and flammability.

Join us as we explore the complex world of refrigerants and the exciting innovations driving the HVAC industry forward.

Refrigerants play a critical role in the functioning of air conditioning and refrigeration systems. They are responsible for transferring heat from the indoor or outdoor space to the refrigeration unit, allowing for temperature control. However, the impact of refrigerants on the environment is a growing concern. Many commonly used refrigerants have high global warming potential (GWP), contributing to climate change. In recent years, there has been a push to develop and adopt refrigerants with lower GWP, leading to the emergence of new refrigerants with unique properties.

Two such refrigerants are R32 and R454B. R32 is a pure hydrofluorocarbon (HFC) refrigerant, while R454B is a blend of HFC and hydrofluoroolefin (HFO) refrigerants. While both of these refrigerants offer lower GWP, they have unique properties that distinguish them from each other.

Both have similar performance to R410A. Both have a similar performance to each other. Both are classified as A2L, mildly flammable refrigerants. Both have a lower GWP than R410A.

R32 is a single-component refrigerant. It is a mildly flammable A2L refrigerant, meaning it can ignite in the presence of an ignition source but only under certain conditions. R32 has a low GWP of 675, making it an attractive option for environmentally conscious companies.

R454B is a zeotropic blend of HFC and HFO refrigerants, 69% R32 and 31% R1234yf. It is a mildly flammable A2L refrigerant with a low GWP of 466. R454B was developed as a potential replacement for high-GWP refrigerants like R410A.

Have you ever made a mistake? If you're a human, I'm sure I know the answer. After 25 years in the industry, I've made a few and am still learning today.

One of my earlier mistakes happened when I sold my first 100% OA Unit.

In this episode, I share this story and a few tips when specifying MAUs. 

You can find detailed video explanations related to this and many other HVAC topics on our YouTube channel.

YouTube Channel:

https://www.youtube.com/InsightPartnersHVACTV

Thank you!

Tony Mormino

Marketing Director, Insight Partners

tmormino@insightusa.com

This episode covers pump chart basics, fully explaining pump and system curves.  

You can watch the video version here: https://www.youtube.com/watch?v=oFY_VIzBPng

At the end of this presentation, participants will better understand the following:

What is a pump system curve
Pump curve vs. system curve
What is a pump control curve
How to use a pump curve to validate pump flow and performance

Thank you to our guest, Tony Furst with Armstrong Fluid Technology, for sharing his years of Engineering and hands-on experience.  

At Insight Partners, we appreciate the opportunity to give back to the HVAC community and thank you for supporting our online events.

Resources and contacts referenced in this prerecorded Livestream:  
YouTube Channel:  https://www.youtube.com/InsightPartnersHVACTV
Insight Partners Website: www.insightusa.com
Connect to Insight Partners on LinkedIn: https://www.linkedin.com/company/insightusa

This is part 5 of a 5-part podcast series. Here we discuss why knowing the difference between Relative Humidity and Dew Point is extremely important.

Relative Humidity: Not a good measure of water in the air (absolute humidity). RH is the percentage of moisture in the air vs. how much it can hold. It answers the question, “how full is the container”?

Dew Point: The atmospheric temperature below which water droplets begin to condense, and dew can form. This is an accurate measurement of water in the air (humidity).

You can watch the full video version of our 1-hour psychrometrics 101 presentations on our YouTube channel, Insight Partners HVAC TV.

YouTube Channel:

https://www.youtube.com/InsightPartnersHVACTV

Download your Insight Partners Psychrometric Chart here:

https://www.insightusa.com/psychrometric-chart-pdf

Thank you!

Tony Mormino

Marketing Director, Insight Partners

tmormino@insightusa.com

This is part 4 of a 5-part podcast series. Using the psych chart, you only need two properties of air to determine the rest. This is an excellent tutorial to understand how the properties are related to each other on the chart.

Below is a link to our pdf chart, which you can download anytime.

You can watch the full video version of our 1-hour psychrometrics 101 presentations on our YouTube channel, Insight Partners HVAC TV.

YouTube Channel:

https://www.youtube.com/InsightPartnersHVACTV

Download your Insight Partners Psychrometric Chart here:

https://www.insightusa.com/psychrometric-chart-pdf

Thank you!

Tony Mormino

Marketing Director, Insight Partners

tmormino@insightusa.com

This is part 3 of a 5-part podcast series. Here we apply the psychrometric processes of air to the psychrometric chart—heating, cooling, dehumidification, humidification, and a combination thereof. 

You can watch the full video version of our 1-hour psychrometrics 101 presentations on our YouTube channel, Insight Partners HVAC TV.

YouTube Channel:

https://www.youtube.com/InsightPartnersHVACTV

Download your Insight Partners Psychrometric Chart here:

https://www.insightusa.com/psychrometric-chart-pdf

Thank you!

Tony Mormino

Marketing Director, Insight Partners

tmormino@insightusa.com

This is part 2 of a 5-part podcast series. At first glance, the chart can appear overwhelming. What’s up with all the lines on the psych chart? Here we break it down and apply the five properties of air discussed in part 1.

You can watch the full video version of our 1-hour psychrometrics 101 presentations on our YouTube channel, Insight Partners HVAC TV.

YouTube Channel:

https://www.youtube.com/InsightPartnersHVACTV

Download your Insight Partners Psychrometric Chart here:

https://www.insightusa.com/psychrometric-chart-pdf

Thank you!

Tony Mormino

Marketing Director, Insight Partners

tmormino@insightusa.com

This is part 1 of a 5-part podcast series. In this episode, we share why psychrometrics has been an important part of our HVAC careers and also discuss the five most commonly used psychometric properties, DB, WB, DP, RH, and Humidity. 

You can watch the full video version of our 1-hour psychrometrics 101 presentations on our YouTube channel, Insight Partners HVAC TV. 

YouTube Channel: 

https://www.youtube.com/InsightPartnersHVACTV

Download your Insight Partners Psychrometric Chart here: 

https://www.insightusa.com/psychrometric-chart-pdf

Thank you!

Tony Mormino

Marketing Director, Insight Partners

tmormino@insightusa.com 

On December 15, 2022, Insight Partners, in conjunction with our valued HVAC partners, will host an all-day PDH marathon! 

One day, four PDH classes. Three of the classes will qualify for 1 PDH anywhere in the US. The third class will be eligible for PDH credits in NC, SC, FL, and GA. 

Certificates for all classes will be provided immediately after the presentation. 

REGISTER HERE: https://www.insightusa.com/insight-online-events

Here is the PDH scheduled for December 15, 2022

9 AM - 10 AM
Pump Curves & System Problem Analysis - Tony Furst, Armstrong Fluid Technology (1 PDH)

11 AM - 12 PM
Cooling Tower Selection and Design - Mark Pfeifer, Marley (1 PDH)

1 PM - 2 PM
Controlling Fan Arrays - Mark Brady, Nortek Air Solutions (1 PDH)

3 PM - 4 PM
Keeping Your Water Clean - David Romeo, Miller Leaman (1 PDH)

This episode is for you if you work on indoor agriculture projects and are asked to specify RO systems to purify the incoming water. 

Insight Partners has been a proud representative of Miller Leaman and has had great success in selling and applying Reverse Osmosis water filtration systems in cannabis grow applications throughout the USA.

In this short podcast, we interview our vendor partners David Romeo with Miller Leaman and discuss Reverse Osmosis Water Filtration systems for grow room applications.  Whether you're using tap water for cannabis production or well water, you may want to consider using reverse osmosis for cannabis production.   

Why you should use RO water in your Grow Room?

Water quality is essential to proper plant growth. When water quality is off, and there are unnecessary particles or minerals in the water, this interferes with the intake of proper nutrients and water absorption by the plant. Water quality should always be one of the first factors to consider when evaluating plans for a new or existing grow room. Along with helping to keep plants healthy, good water quality will also help to ensure that equipment life is extended, which will cut costs in the long run. No matter what type of water source you’re pulling from, a reverse osmosis (RO) system is essential to properly filter your grow room irrigation water.

Is Using Reverse Osmosis (RO) Water Useful In Growing?

Growers opt for purified water, especially if utilizing hydroponic techniques. You will see a difference in water purification techniques, but reverse osmosis (RO) is one of the most effective and reliable methods on the market. RO uses a semipermeable membrane, where even dissolved solids can be removed from a water source. This theoretically makes the water perfectly pure, eliminating bacteria, viruses, and dissolved solids from water. RO is not just used in horticulture. In fact, it’s mainly used to purify drinking water, so why not give your cannabis plants the very best?

Schedule your 15 Min Discovery Call Here: https://calendly.com/tmormino/grow-facility-hvac-discussion

For pricing and information on our RO Filter Systems: Email Tony Mormino at Insight Partners: tmormino@insightusa.com

Call Tony Mormino at Insight Partners: 828.712.4769

Visit our website: https://www.insightusa.com/grow-room-hvac

We sell and support commercial indoor agriculture HVAC equipment and controls in grow rooms across the country. In this podcast, I share three prevalent mistakes regarding equipment sizing and grow room HVAC equipment selection. 

The most common mistakes are missing the required dehumidification load, not understanding the room sensible heat ratio, and selecting off-the-shelf air conditioning equipment vs. commercial grow room air conditions, aka grow room dehumidifiers. 

Plants are not people; load calculations for Cannabis grow rooms are different than typical commercial applications. Mistakes are common and costly; hopefully, this video will offer some insight into some issues to be aware of. 

Grow room HVAC calculations require specific attention to the plant quantity, water rates, lighting schedule, lighting types, and many other factors unique to indoor grow factifies. 

See the full Grow Room HVAC Basics Video on our YouTube channel. Insight Partners HVAC TV. Here is the link: https://youtu.be/JQeF6J-cJeI

If you're building a new grow facility or have an existing facility that is having trouble maintaining temperature and humidity, please feel free to reach out. My name is Tony Mormino, and my email is tmormino@insightusa.com.

On this audio version of a recent Livestream event, I am joined by three Fanwall experts from Nortek Air Solutions, LLC, the world's most extensive custom air handling unit manufacturer and creator of the popular Fanwall Technology. This back-and-forth interview-style presentation will uncover five common myths associated with fan arrays.

HVAC mechanical engineers face quite a challenge today. Systems must be designed with high reliability, small footprints, low power consumption, low acoustics and vibration, efficient heat transfer, and high filtration. And do all this within the end users' budget. That's not easy.

So, we hope this presentation will give you a few more tools in your engineering toolbelt that may assist in meeting these objectives.  

What you will learn: Uncover common fan array myths, The principles of fan arrays, How to apply fan array technology, When fan arrays don't make sense, and Real-life installed fan arrays. 

Today, more and more building owners are choosing Fanwall technology. You can find fan arrays applied in almost any commercial or industrial applications - hospitals, data centers, laboratories, schools and universities, and office buildings. The Fanwall array of fans allows designers to optimize more closely the fan wheel geometry and motor horsepower for a specific application. The result is smaller fans and motors, running closer to peak efficiencies, thus reducing energy costs.

This podcast reveals several examples of fan wall retrofits or fan array retrofits showing the knockdown capacities of the individual fan cubes also known as fan modules.

At Insight Partners, we continue to appreciate the opportunity to give back to the HVAC community, and thank you for supporting our online events. 

Resources and contacts referenced in this Livestream:

Visit our YouTube Channel:  Insight Partners HVAC TV

Connect with me on LinkedIn:  www.linkedin.com/in/tony-mormino

In this solo podcast, I share my experience as a sales engineer in the HVAC industry. 

If you're an Engineer or soon-to-be Engineering grad and curious about a sales career in the HVAC field, then this podcast is for you!

Resources and contacts referenced in this podcast:  

YouTube Channel:  https://www.youtube.com/InsightPartnersHVACTV

Insight Partners Website: www.insightusa.com

Tony Mormino at Insight Partners: tmormino@insightusa.com  

Connect with me on LinkedIn:  https://www.linkedin.com/in/tony-mormino 

In this LIVE event, I was joined by Mark W. Fly, PE with AAON. Mr. Fly has over 40 years of experience as a Researcher, Consulting Engineer, Contractor, and Manufacturer in the HVAC Industry. He holds a Bachelor of Science in Engineering Physics from Missouri State University and is a Licensed Professional Engineer in two states. He is currently the Executive Director of the Norman Asbjornson Innovation Center at AAON, Inc. in Tulsa, Oklahoma, and served as Director of Engineering of AAON for 11 years before taking that position.

Fans provide the primary transport method for moving thermal energy into occupied spaces in most all cases. Designers need to understand the characteristics and limitations of fans, even if embedded into packaged or self-contained equipment to apply the equipment properly. This presentation covers: Different fan types and their characteristics, Fan curves and fan laws, how to use and apply them, Fan stall and unstable regions of operation, How to select the best fan for the flow.

Thank you and we hope that you enjoy!

See all of our videos on our YouTube Channel:  https://www.youtube.com/InsightPartnersHVACTV

Check out Insight Partners on our Website: www.insightusa.com  

Connect with me on LinkedIn:  https://www.linkedin.com/in/tony-mormino

In this broadcast, I am joined by Tomas Novillo, Director of Strategic Accounts, Nyle Water Heating Systems, to show how Hot Water Heat Pumps work.

We also discuss two concepts we keep hearing more often, Electrification and Decarbonization. Like it or not, that seems to be the way segments of the HVAC industry are heading.

The manufacturing community is starting to adjust, and we are proud to bring you this Live event, Heat Pump Water Heaters, Just the Basics. We will discuss how Heat Pump Water Heaters can be applied in commercial and residential applications and their role in the movement toward electrification.

Presented by Insight Partners and Nyle Heating Systems. Nyle Systems is a growing, innovative company that develops, manufactures, and sells heat pump-driven, energy-saving products. Specifically, they build industrial equipment for Lumber Drying, Food Dehydration, and Heat Pump Water Heating.

The product design and manufacturing facility is in Brewer, Maine, just across the river from Bangor, central Maine's economic and cultural center. They are firm believers in the need to build a more sustainable future, including the urgent need to reduce emissions. To switch from fossil fuels to electricity based on renewables, the world requires the electrification of many processes, and that is where Nyle focuses. "At Nyle, our mission is to enable Energy Efficiency and the Electrification of industrial and commercial processes, allowing our customers to transition towards a renewable, sustainable energy system."

Connect with Tony Mormino and Insight Partners Email: tmormino@insightusa.com

Visit our website: https://www.insightusa.com/

Connect with me on LinkedIn: https://www.linkedin.com/in/tony-mormino

Connect to Insight Partners on LinkedIn: https://www.linkedin.com/company/insightusa

Visit our YouTube channel: https://www.youtube.com/InsightPartnersHVACTV

Thank you!

This podcast discusses the difference between Relative Humidity and Dew Point. This is an audio version of our live stream presentation on LinkedIn and our YouTube channel (Insight Partners HVAC TV). 

Here is a quick summary of the content. 

Relative Humidity: Not a good measure of water in the air (absolute humidity). RH is the percentage of how much moisture is in the air vs. how much it can hold. It answers the question “how full is the container”?

Dew Point: The atmospheric temperature below which water droplets begin to condense and dew can form. This is an accurate measurement of water in the air (humidity). We also look at Dry Bulb, Wetbulb (Illustrating with a Sling Psychrometer), Humidity in Grains/LB of dry air.

We thank you for listening! 

Tony Mormino

tmormino@insightusa.com

https://www.insightusa.com/

In this podcast, I discuss the difference between a Copeland Digital Scroll Compressor and a Danfoss Variable Speed Compressor. These two HVAC modulating scroll compressor technologies accomplish similar results but are constructed differently. 

Watch LIVE Video Here: https://youtu.be/rH-VqoUvtC0?t=38

The Copeland Scroll Digital offers compressor modulation from 10-100 percent, allowing cooling systems to automatically adjust capacity as needed while reducing energy consumption. This scroll technology allows for precise HVAC system control, is more efficient than on/off compressors, and allows for almost continuous operation during dehumidification modes. Variable-capacity control is accomplished by timing the compression by engaging and disengaging the top scroll while motor speed remains constant. Advantages are efficiency, precise control, very low turn down to 10%, and constant velocity refrigerant allowing for effective oil return. For some of the compressor sizes, the "modulating" can produce unwanted noise. Special considerations for location and attenuation are recommended. 

Emerson’s Copeland Scroll Variable Speed compressors are designed with AC drive controls that modulate the compressor speed. This compressor speed modulation allows for precise capacity control. Advantages are efficiency, low acoustical characteristics, and precise control. Special considerations are required to ensure oil return which usually prohibits low turndown capabilities. Usually, the minimum allowable turn down is in the 10-25% range.  

Thank you for listening and please let me know if you have any questions!

---------------------------------------------------------------------------------------------------------------------------- Get in touch with me:

Call me: 828-712-4769 Email me: tmormino@insightusa.com Visit our website: https://www.insightusa.com/ Connect with me on LinkedIn: https://www.linkedin.com/in/tony-mormino  View current line card: https://www.insightusa.com/manufactur... ----------------------------------------------------------------------------------------------------------------------------

In this episode, I’m super excited to be joined by our own Adam Shaffer, one of the country’s leading experts on Grow Room HVAC design and application.

You can see the full video version on our YouTube Channel, Insight Partners HVAC TV. 

https://youtu.be/JQeF6J-cJeI

Adam has been sizing, selling, and supporting Grow Facilities HVAC systems for many years and will be discussing the challenges associated with these applications. In this audio edition of our live video, we discuss temperature and humidity in grow rooms, dehumidification in grow facilities, maximizing cannabis yield, cleaning water for cannabis, why standard dehumidifiers for grow rooms struggle to keep up, the understanding of vapor pressure differential in grow rooms, grow room temperature control, calculating HVAC loads for grow facilities, optimum humidity for a cannabis plant, how to spot microclimates on your cannabis canopy, ideal grow room temperature and humidity, problems with high humidity in your grow room, controlling your humidity and temperature for indoor cannabis, and much more.

If you are an Engineer, Owner, or Operator and are having issues with your Cannabis Grow Facility Temperature and Humidity Control please call or emails us. We handle jobs all over the county and are here to help! We specialize in grow room air conditioning and grow room air conditioners. With our equipment and controls experience, we can dial in the Ideal Grow Room Humidity (RH) and Temperature. We can also work with you to determine the ideal temps and RH during all stages of growing. You can email me, Tony Mormino, at tmormino@insightusa.com 

In this podcast, we're going to explore the importance of Acoustics in HVAC and how it relates to air distribution in the system. This is the audio version of a LIVE online event with our partners at BOSCH Thermotechnologies. 

Watch Full Video Recoding on our YouTube Channel: https://youtu.be/iUWsKqY_zPo

Noise is a topic that plays a major role in any HVAC system yet it is a topic that is either misunderstood or not very well understood in the HVAC world. People constantly confuse key terms, definitions, and commonly rated values. 

Some examples of those terms are sound unit dB vs. dB(A); HVAC Sound Pressure vs. HVAC Sound Power; AHRI 260.2011 vs. AHRI 260.2017, A-Weighted Sound, to name a few.

So, in this course, we will go back to the basics of sound where we will define commonly used key terms, review the concepts of acoustics and frequency, understand the difference between sound pressure and sound power, and review how sound is measured in the HVAC units. We will wrap up with some case studies which will help to determine how room construction and unit construction can affect the NC (noise criteria) rating of a given room.

We will also show real-life examples of mitigating HVAC Equipment Noise. 

Questions? Email Tony Mormino at tmormino@insightusa.com Visit our website: https://www.insightusa.com/  Connect with me on LinkedIn: https://www.linkedin.com/in/tony-mormino

What is a Decibel A pressure variation in a sound wave can be measured in micro Pascal's to determine its loudness. The greater the pressure variation there is in a sound wave, the louder it'll be. The micro Pascal is an actual physical measurement of the pressure variation in a sound wave.  the weakest sound detectable by the human ear is 20 micro Pascal's.  To put this into perspective a pressure change at this level causes the eardrum to displace less than the diameter of a hydrogen molecule. At the same time, the ear can also withstand pressure changes more than a million times this lower threshold. This type of measurement would result in a rather large and awkward scale. To avoid this another scale is used the decibel or DB scale. 

A-weighted sound in HVAC System Acoustics A-weighted sound criteria are commonly used in outdoor sound evaluations - and are often incorporated into city building codes when referencing the maximum acceptable sound pressure levels at the property line. It is popular because it is a single number that most sound meters include.

The Use of NC Criteria in HVAC Units Noise Criteria, or NC, is used as a standard describing or expressing the complexity of relative loudness of a space within a range of frequencies, where the acoustical environment greatly influences the amplitudes and frequencies heard by the occupant.  So, simply stated, NC is the Sound Pressure at each Octave Band - with an NC of 35 referenced as the most common noise level specified for HVAC equipment.

HVAC Sound and Frequency The frequency which is measured in hertz is the number of pressure variations that occur per second in a sound wave the sounds frequency produces a distinctive tone. This is why a flute that has a high frequency and a bass drum that has a low-frequency sound is so different. 

What is the difference between Sound Power vs. Sound Pressure in HVAC Systems? SOUND POWER and SOUND PRESSURE are often presented when discussing Acoustics for buildings. Engineers must clearly distinguish and understand the difference between SOUND POWER and SOUND PRESSURE levels.

AHRI defines SOUND POWER as ACOUSTIC POWER, which is, in a specific frequency band, the rate at which the total airborne sound energy is radiated by a source, measured in watts. Simply stated, this means SOUND POWER is the rate at which total Sound Energy is emitted, radiated, reflected, or transmitted by a sound source, per unit time - or basically, WHAT SOUND TH

In this quick, 20 minute live discussion, Tony and I give you 5 reasons when you may want to consider using Vertical In-line Pumps vs. Horizontal End Suction Pumps. My special guest, Tony Furst, Regional Manager for Armstrong Fluid Technologies, is one of the world leaders in Vertical Pump technology. We will also stick around for live Q & A. Thank you and hope to see you there!

Watch the video version on our YouTube Channel: https://youtu.be/m_HlHAng4UA

5 Reasons To Consider Vertical Inline (VIL Pumps) Pumps vs. End Suction Pumps:

INSTALLATION Split Coupled Vertical In-Line pumps, being integral components of the pipework, eliminate the need for inertia bases, inertia base springs, flexible pipe connectors, field grouting, and alignment. Pipe hangers sized for the weight of the pump, piping, and fittings are the only supports required. Pipe stools, with vibration isolating pads, may be installed under each pipe leg.

SPACE-SAVING Greatest floor space savings result when Vertical In-Line pumps are installed with Armstrong Suction Guides and Flo-Trex valves. Equivalent base mounted, horizontal split case pumps may take 3 times more floor space.

MAINTENANCE The mechanical seal is the critical service item in any pump. Removal of the Series 4300 split spacer coupling allows all mechanical seal components to be withdrawn for servicing, through the resulting space between the pump and motor shafts, without disturbing other pump components or motor connections. Re-installing the rigid coupling brings the unit rotating assembly back to factory alignment specifications.

RELIABILITY Dynamically balanced impeller and shaft assembly rotating vertically on the Series 4300 centerline translate to a quiet, long-lasting pump with minimum vibration, as static shaft deflection is eliminated. There are no pump bearings to service in the Vertical In-Line design. Series 4300 is a reliable, time-proven unit with less downtime.

FLEXIBILITY Small footprint, low installation costs, reliable, and easy to maintain. These features, combined with a flow range of more than 30,000 USgpm (1,900 L/s),  affirms the Series 4300 as the most flexible pump design available.

Get in touch with me:  Email: tmormino@insightusa.com Visit our website:  https://www.insightusa.com/  Connect with me on LinkedIn:  https://www.linkedin.com/in/tony-mormino View current line card:  https://www.insightusa.com/manufacturers Connect to Insight Partners on LinkedIn: https://www.linkedin.com/company/insightusa Visit our YouTube channel:  https://www.youtube.com/InsightPartnersHVACTV

In this episode, I discuss the importance of knowing the difference between Hot Gas Bypass and Hot Gas Reheat. 

Check out our YouTube Channel for a video version of this discussion: https://www.youtube.com/InsightPartnersHVACTV

HOT GAS REHEAT uses the high pressure, high temperature, compressor discharge gas to reheat the air leaving the evaporator coil. This is achieved by running the gas through a hot gas reheat coil using hot gas reheat valves. Hot gas reheat is typically used in dehumidification modes to meet the desired space sensible temperature set point. Modulating hot gas reheat, the more advanced form of reheat, allows us to precisely control the HVAC system leaving air temperature. As opposed to the older style electric reheat, which works well but wastes a lot of energy. Advances in HVAC controls and technology in HVAC systems over the years have made hot gas reheat very popular.

HOT GAS BYPASS provides an artificial load on the evaporator by introducing a portion of high pressure, high-temperature gas to the evaporator/suction side of the system. An inexpensive and simple way to keep the HVAC system running without freezing the coil but a huge energy waster. The hot gas bypass valve is old technology used on a limited basis today quickly being replaces by modulating compressors or variable capacity compressors.  Get in touch with me:  Email: tmormino@insightusa.com Visit our website:  https://www.insightusa.com/  Connect with me on LinkedIn:  https://www.linkedin.com/in/tony-mormino Visit our YouTube channel:  https://www.youtube.com/InsightPartnersHVACTV

This episode is an audio version of our most popular online event, How To Read A Psychrometric Chart.  You can watch the video version here anytime here > https://youtu.be/b4IVoVP2eeo. 

We discuss Basic Psychrometrics 101.

Part 1 Properties of Air. We explain the difference between Dry Bulb, Wet Bulb, Relative Humidity, Humidity, and Dew Point.

Part 2 Building the Psychrometric chart. A psychrometric chart is a graphical representation of the psychrometric processes of air. See how the psychrometric properties make up the chart.

Part 3 We look at psychrometric processes such as cooling, heating, humidification, dehumidification, cooling, and dehumidification.

Part 4 Determining Air Properties Part 5 Relative Humidity vs. Dew Point

Hope you enjoy it!!

Get in touch with me:  Email: tmormino@insightusa.com

Visit our website:  https://www.insightusa.com/

Connect with me on LinkedIn:  https://www.linkedin.com/in/tony-mormino

Visit our YouTube channel:  https://www.youtube.com/InsightPartnersHVACTV

Thank you and hope you will join us. If you have any questions Tony Mormino can be reached at tmormino@insightusa.com.

Since 1997 I've sold a "few" make-up air units and have learned a lot along the way.  In this short episode, I share 5 things to look out for when specifying DOAS systems. 

Get in touch with me:  Email: tmormino@insightusa.com

Visit our website:  https://www.insightusa.com/

Connect with me on LinkedIn:  https://www.linkedin.com/in/tony-mormino

Visit our YouTube channel:  https://www.youtube.com/InsightPartnersHVACTV

Thank you and hope you will join us. If you have any questions Tony Mormino can be reached at tmormino@insightusa.com.